594 		DBG_PRINT(ERR_DBG,  in init_shared_mem()
609 			DBG_PRINT(ERR_DBG, "Fifo %d: Invalid length (%d) - "  in init_shared_mem()
709 			DBG_PRINT(ERR_DBG, "%s: Ring%d RxD count is not a "  in init_shared_mem()
1067 		DBG_PRINT(ERR_DBG, "%s: Device is on PCI-E bus\n",  in s2io_print_pci_mode()
1102 	DBG_PRINT(ERR_DBG, "%s: Device is on %d bit %s\n",  in s2io_print_pci_mode()
1210 		DBG_PRINT(ERR_DBG, "ERROR: Setting Swapper failed\n");  in init_nic()
1642 			DBG_PRINT(ERR_DBG,  in init_nic()
1721 				DBG_PRINT(ERR_DBG, "%s: RTI init failed\n",  in init_nic()
2127 		DBG_PRINT(ERR_DBG, "TDMA is not ready!\n");  in verify_xena_quiescence()
2131 		DBG_PRINT(ERR_DBG, "RDMA is not ready!\n");  in verify_xena_quiescence()
2135 		DBG_PRINT(ERR_DBG, "PFC is not ready!\n");  in verify_xena_quiescence()
2139 		DBG_PRINT(ERR_DBG, "TMAC BUF is not empty!\n");  in verify_xena_quiescence()
2143 		DBG_PRINT(ERR_DBG, "PIC is not QUIESCENT!\n");  in verify_xena_quiescence()
2147 		DBG_PRINT(ERR_DBG, "MC_DRAM is not ready!\n");  in verify_xena_quiescence()
2151 		DBG_PRINT(ERR_DBG, "MC_QUEUES is not ready!\n");  in verify_xena_quiescence()
2155 		DBG_PRINT(ERR_DBG, "M_PLL is not locked!\n");  in verify_xena_quiescence()
2167 		DBG_PRINT(ERR_DBG, "P_PLL is not locked!\n");  in verify_xena_quiescence()
2172 		DBG_PRINT(ERR_DBG, "RC_PRC is not QUIESCENT!\n");  in verify_xena_quiescence()
2276 		DBG_PRINT(ERR_DBG, "%s: device is not ready, "  in start_nic()
2930 			DBG_PRINT(ERR_DBG, "%s: NULL skb in Rx Intr\n",  in rx_intr_handler()
3063 			DBG_PRINT(ERR_DBG, "%s: NULL skb in Tx Free Intr\n",  in tx_intr_handler()
3201 				DBG_PRINT(ERR_DBG,  in s2io_chk_xpak_counter()
3203 				DBG_PRINT(ERR_DBG,  in s2io_chk_xpak_counter()
3207 				DBG_PRINT(ERR_DBG,  in s2io_chk_xpak_counter()
3209 				DBG_PRINT(ERR_DBG,  in s2io_chk_xpak_counter()
3213 				DBG_PRINT(ERR_DBG,  in s2io_chk_xpak_counter()
3215 				DBG_PRINT(ERR_DBG,  in s2io_chk_xpak_counter()
3219 				DBG_PRINT(ERR_DBG,  in s2io_chk_xpak_counter()
3256 		DBG_PRINT(ERR_DBG,  in s2io_updt_xpak_counter()
3264 		DBG_PRINT(ERR_DBG, "Incorrect value at PMA address 0x0000 - "  in s2io_updt_xpak_counter()
3440 		DBG_PRINT(ERR_DBG, "%s SW_Reset failed!\n", __func__);  in s2io_reset()
3557 			DBG_PRINT(ERR_DBG, "%s: Endian settings are wrong, "  in s2io_set_swapper()
3590 			DBG_PRINT(ERR_DBG,  in s2io_set_swapper()
3651 		DBG_PRINT(ERR_DBG,  in s2io_set_swapper()
3674 		DBG_PRINT(ERR_DBG, "XMSI # %d Access failed\n", i);  in wait_for_msix_trans()
3697 			DBG_PRINT(ERR_DBG, "%s: index: %d failed\n",  in restore_xmsi_data()
3719 			DBG_PRINT(ERR_DBG, "%s: index: %d failed\n",  in store_xmsi_data()
3793 		DBG_PRINT(ERR_DBG, "Enabling MSI-X failed\n");  in s2io_enable_msi_x()
3838 		DBG_PRINT(ERR_DBG, "%s: PCI %s: cannot assign irq %d\n",  in s2io_test_msi()
3856 		DBG_PRINT(ERR_DBG, "%s: PCI %s: No interrupt was generated "  in s2io_test_msi()
3932 		DBG_PRINT(ERR_DBG, "%s: H/W initialization failed\n",  in s2io_open()
3938 		DBG_PRINT(ERR_DBG, "Set Mac Address Failed\n");  in s2io_open()
5031 			DBG_PRINT(ERR_DBG,  in s2io_set_multicast()
5057 				DBG_PRINT(ERR_DBG,  in s2io_set_multicast()
5087 				DBG_PRINT(ERR_DBG,  in s2io_set_multicast()
5157 		DBG_PRINT(ERR_DBG,  in do_s2io_add_mc()
5208 	DBG_PRINT(ERR_DBG, "MAC address 0x%llx not found in CAM\n",  in do_s2io_delete_unicast_mc()
5300 		DBG_PRINT(ERR_DBG, "CAM full no space left for Unicast MAC\n");  in do_s2io_prog_unicast()
5758 			DBG_PRINT(ERR_DBG, "Read of VPD data failed\n");  in s2io_vpd_read()
5821 			DBG_PRINT(ERR_DBG, "Read of EEPROM failed\n");  in s2io_ethtool_geeprom()
5853 		DBG_PRINT(ERR_DBG,  in s2io_ethtool_seeprom()
5869 			DBG_PRINT(ERR_DBG,  in s2io_ethtool_seeprom()
5933 		DBG_PRINT(ERR_DBG, "Write Test level %d fails\n", 1);  in s2io_register_test()
5941 		DBG_PRINT(ERR_DBG, "Write Test level %d fails\n", 2);  in s2io_register_test()
5989 		DBG_PRINT(ERR_DBG, "%s: eeprom test error at offset 0x4F0. "  in s2io_eeprom_test()
6011 		DBG_PRINT(ERR_DBG, "%s: eeprom test error at offset 0x7F0. "  in s2io_eeprom_test()
6259 			DBG_PRINT(ERR_DBG, "%s: is not up, cannot run test\n",  in s2io_ethtool_test()
6689 		DBG_PRINT(ERR_DBG, "%s: MTU size is invalid.\n", dev->name);  in s2io_change_mtu()
6699 			DBG_PRINT(ERR_DBG, "%s: Device bring up failed\n",  in s2io_change_mtu()
6767 				DBG_PRINT(ERR_DBG,  in s2io_set_link()
6972 		DBG_PRINT(ERR_DBG, "%s: Defaulting to INTA\n", dev->name);  in s2io_add_isr()
7015 					DBG_PRINT(ERR_DBG,  in s2io_add_isr()
7027 					DBG_PRINT(ERR_DBG,  in s2io_add_isr()
7031 					DBG_PRINT(ERR_DBG,  in s2io_add_isr()
7051 			DBG_PRINT(ERR_DBG, "%s: ISR registration failed\n",  in s2io_add_isr()
7124 			DBG_PRINT(ERR_DBG, "Device not Quiescent - "  in do_s2io_card_down()
7158 		DBG_PRINT(ERR_DBG, "%s: H/W initialization failed\n",  in s2io_card_up()
7179 			DBG_PRINT(ERR_DBG, "%s: Out of memory in Open\n",  in s2io_card_up()
7220 		DBG_PRINT(ERR_DBG, "%s: Starting NIC failed\n", dev->name);  in s2io_card_up()
7275 		DBG_PRINT(ERR_DBG, "%s: Device bring up failed\n", dev->name);  in s2io_restart_nic()
7278 	DBG_PRINT(ERR_DBG, "%s: was reset by Tx watchdog timer\n", dev->name);  in s2io_restart_nic()
7391 			DBG_PRINT(ERR_DBG, "%s: Rx error Value: 0x%x\n",  in rx_osm_handler()
7471 					DBG_PRINT(ERR_DBG,  in rx_osm_handler()
7517 			DBG_PRINT(ERR_DBG, "%s: Link down\n", dev->name);  in s2io_link()
7525 			DBG_PRINT(ERR_DBG, "%s: Link Up\n", dev->name);  in s2io_link()
7574 		DBG_PRINT(ERR_DBG, "Requested number of tx fifos "  in s2io_verify_parm()
7582 		DBG_PRINT(ERR_DBG, "Default to %d tx fifos\n", tx_fifo_num);  in s2io_verify_parm()
7590 			DBG_PRINT(ERR_DBG,  in s2io_verify_parm()
7598 		DBG_PRINT(ERR_DBG,  in s2io_verify_parm()
7600 		DBG_PRINT(ERR_DBG, "Disabling transmit steering\n");  in s2io_verify_parm()
7605 		DBG_PRINT(ERR_DBG,  in s2io_verify_parm()
7607 		DBG_PRINT(ERR_DBG, "Default to %d rx rings\n",  in s2io_verify_parm()
7613 		DBG_PRINT(ERR_DBG, "Wrong intr_type requested. "  in s2io_verify_parm()
7621 		DBG_PRINT(ERR_DBG, "Xframe I does not support MSI_X. "  in s2io_verify_parm()
7627 		DBG_PRINT(ERR_DBG, "Requested ring mode not supported\n");  in s2io_verify_parm()
7628 		DBG_PRINT(ERR_DBG, "Defaulting to 1-buffer mode\n");  in s2io_verify_parm()
7634 			DBG_PRINT(ERR_DBG, "Requested rx ring size not "  in s2io_verify_parm()
7728 		DBG_PRINT(ERR_DBG,  in s2io_init_nic()
7737 			DBG_PRINT(ERR_DBG,  in s2io_init_nic()
7751 		DBG_PRINT(ERR_DBG, "%s: Request Regions failed - %x\n",  in s2io_init_nic()
7889 		DBG_PRINT(ERR_DBG, "%s: Memory allocation failed\n", dev->name);  in s2io_init_nic()
7896 		DBG_PRINT(ERR_DBG, "%s: Neterion: cannot remap io mem1\n",  in s2io_init_nic()
7904 		DBG_PRINT(ERR_DBG, "%s: Neterion: cannot remap io mem2\n",  in s2io_init_nic()
7938 		DBG_PRINT(ERR_DBG, "%s: swapper settings are wrong\n",  in s2io_init_nic()
7948 			DBG_PRINT(ERR_DBG, "%s: Unsupported PCI bus mode\n",  in s2io_init_nic()
7966 			DBG_PRINT(ERR_DBG,  in s2io_init_nic()
8072 		DBG_PRINT(ERR_DBG, "Device registration failed\n");  in s2io_init_nic()
8077 	DBG_PRINT(ERR_DBG, "Copyright(c) 2002-2010 Exar Corp.\n");  in s2io_init_nic()
8078 	DBG_PRINT(ERR_DBG, "%s: Neterion %s (rev %d)\n", dev->name,  in s2io_init_nic()
8080 	DBG_PRINT(ERR_DBG, "%s: Driver version %s\n", dev->name,  in s2io_init_nic()
8082 	DBG_PRINT(ERR_DBG, "%s: MAC Address: %pM\n", dev->name, dev->dev_addr);  in s2io_init_nic()
8083 	DBG_PRINT(ERR_DBG, "Serial number: %s\n", sp->serial_num);  in s2io_init_nic()
8094 		DBG_PRINT(ERR_DBG, "%s: 1-Buffer receive mode enabled\n",  in s2io_init_nic()
8098 		DBG_PRINT(ERR_DBG, "%s: 2-Buffer receive mode enabled\n",  in s2io_init_nic()
8105 		DBG_PRINT(ERR_DBG, "%s: NAPI disabled\n", dev->name);  in s2io_init_nic()
8108 		DBG_PRINT(ERR_DBG, "%s: NAPI enabled\n", dev->name);  in s2io_init_nic()
8112 	DBG_PRINT(ERR_DBG, "%s: Using %d Tx fifo(s)\n", dev->name,  in s2io_init_nic()
8115 	DBG_PRINT(ERR_DBG, "%s: Using %d Rx ring(s)\n", dev->name,  in s2io_init_nic()
8120 		DBG_PRINT(ERR_DBG, "%s: Interrupt type INTA\n", dev->name);  in s2io_init_nic()
8123 		DBG_PRINT(ERR_DBG, "%s: Interrupt type MSI-X\n", dev->name);  in s2io_init_nic()
8132 		DBG_PRINT(ERR_DBG, "%s: Multiqueue support enabled\n",  in s2io_init_nic()
8135 		DBG_PRINT(ERR_DBG, "%s: Multiqueue support disabled\n",  in s2io_init_nic()
8140 		DBG_PRINT(ERR_DBG, "%s: No steering enabled for transmit\n",  in s2io_init_nic()
8144 		DBG_PRINT(ERR_DBG,  in s2io_init_nic()
8149 		DBG_PRINT(ERR_DBG,  in s2io_init_nic()
8154 	DBG_PRINT(ERR_DBG, "%s: Large receive offload enabled\n",  in s2io_init_nic()
8157 		DBG_PRINT(ERR_DBG,  in s2io_init_nic()
8208 		DBG_PRINT(ERR_DBG, "Driver Data is NULL!!\n");  in s2io_rem_nic()
8535 		DBG_PRINT(ERR_DBG, "%s: Don't know, can't say!!\n", __func__);  in s2io_club_tcp_session()