Lines Matching refs:mlx4_err
179 mlx4_err(dev, "Only same port types supported on this HCA, aborting\n"); in mlx4_check_port_params()
187 mlx4_err(dev, "Requested port type for port %d is not supported on this HCA\n", in mlx4_check_port_params()
215 mlx4_err(dev, "QUERY_DEV_CAP command failed, aborting.\n"); in mlx4_query_func()
295 mlx4_err(dev, "QUERY_PORT command failed.\n"); in mlx4_dev_port()
327 mlx4_err(dev, "QUERY_DEV_CAP command failed, aborting\n"); in mlx4_dev_cap()
333 mlx4_err(dev, "HCA minimum page size of %d bigger than kernel PAGE_SIZE of %ld, aborting\n", in mlx4_dev_cap()
338 mlx4_err(dev, "HCA has %d ports, but we only support %d, aborting\n", in mlx4_dev_cap()
344 …mlx4_err(dev, "HCA reported UAR size of 0x%x bigger than PCI resource 2 size of 0x%llx, aborting\n… in mlx4_dev_cap()
359 mlx4_err(dev, "QUERY_PORT command failed, aborting\n"); in mlx4_dev_cap()
759 mlx4_err(dev, "QUERY_HCA command failed, aborting\n"); in mlx4_slave_cap()
767 mlx4_err(dev, "Unknown hca global capabilities\n"); in mlx4_slave_cap()
779 mlx4_err(dev, "QUERY_DEV_CAP command failed, aborting\n"); in mlx4_slave_cap()
785 mlx4_err(dev, "QUERY_FW command failed: could not get FW version\n"); in mlx4_slave_cap()
790 mlx4_err(dev, "HCA minimum page size of %d bigger than kernel PAGE_SIZE of %ld, aborting\n", in mlx4_slave_cap()
800 mlx4_err(dev, "UAR size:%d != kernel PAGE_SIZE of %ld\n", in mlx4_slave_cap()
808 mlx4_err(dev, "QUERY_FUNC_CAP general command failed, aborting (%d)\n", in mlx4_slave_cap()
815 mlx4_err(dev, "Unknown pf context behaviour %x known flags %x\n", in mlx4_slave_cap()
838 mlx4_err(dev, "HCA has %d ports, but we only support %d, aborting\n", in mlx4_slave_cap()
859 mlx4_err(dev, "QUERY_FUNC_CAP port command failed for port %d, aborting (%d)\n", in mlx4_slave_cap()
880 …mlx4_err(dev, "HCA reported UAR region size of 0x%x bigger than PCI resource 2 size of 0x%llx, abo… in mlx4_slave_cap()
989 mlx4_err(dev, "Failed to set port %d, aborting\n", in mlx4_change_port_types()
997 mlx4_err(dev, "Failed to register device\n"); in mlx4_change_port_types()
1050 mlx4_err(mdev, "%s is not supported port type\n", buf); in set_port_type()
1077 …mlx4_err(mdev, "Auto sensing is not supported on this HCA. Set only 'eth' or 'ib' for both ports (… in set_port_type()
1172 mlx4_err(mdev, "%s is invalid IBTA mtu\n", buf); in set_port_ib_mtu()
1185 mlx4_err(mdev, "Failed to set port %d, aborting\n", in set_port_ib_mtu()
1211 mlx4_err(dev, "Failed to bond device: %d\n", ret); in mlx4_bond()
1230 mlx4_err(dev, "Failed to unbond device: %d\n", ret); in mlx4_unbond()
1273 mlx4_err(dev, "Failed to change port mape: %d\n", err); in mlx4_port_map_set()
1290 mlx4_err(dev, "Couldn't allocate FW area, aborting\n"); in mlx4_load_fw()
1296 mlx4_err(dev, "MAP_FA command failed, aborting\n"); in mlx4_load_fw()
1302 mlx4_err(dev, "RUN_FW command failed, aborting\n"); in mlx4_load_fw()
1385 mlx4_err(dev, "SET_ICM_SIZE command failed, aborting\n"); in mlx4_init_icm()
1396 mlx4_err(dev, "Couldn't allocate aux memory, aborting\n"); in mlx4_init_icm()
1402 mlx4_err(dev, "MAP_ICM_AUX command failed, aborting\n"); in mlx4_init_icm()
1408 mlx4_err(dev, "Failed to map cMPT context memory, aborting\n"); in mlx4_init_icm()
1418 mlx4_err(dev, "Failed to map EQ context memory, aborting\n"); in mlx4_init_icm()
1439 mlx4_err(dev, "Failed to map MTT context memory, aborting\n"); in mlx4_init_icm()
1449 mlx4_err(dev, "Failed to map dMPT context memory, aborting\n"); in mlx4_init_icm()
1460 mlx4_err(dev, "Failed to map QP context memory, aborting\n"); in mlx4_init_icm()
1471 mlx4_err(dev, "Failed to map AUXC context memory, aborting\n"); in mlx4_init_icm()
1482 mlx4_err(dev, "Failed to map ALTC context memory, aborting\n"); in mlx4_init_icm()
1493 mlx4_err(dev, "Failed to map RDMARC context memory, aborting\n"); in mlx4_init_icm()
1503 mlx4_err(dev, "Failed to map CQ context memory, aborting\n"); in mlx4_init_icm()
1513 mlx4_err(dev, "Failed to map SRQ context memory, aborting\n"); in mlx4_init_icm()
1531 mlx4_err(dev, "Failed to map MCG context memory, aborting\n"); in mlx4_init_icm()
1729 mlx4_err(dev, "Communication channel is offline.\n"); in mlx4_comm_check_offline()
1765 mlx4_err(dev, "PF is not responsive, skipping initialization\n"); in mlx4_init_slave()
1791 mlx4_err(dev, "slave driver version is not supported by the master\n"); in mlx4_init_slave()
1879 mlx4_err(dev, "DMFS high rate mode not supported\n"); in choose_steering_mode()
1948 mlx4_err(dev, in mlx4_validate_optimized_steering()
1955 mlx4_err(dev, in mlx4_validate_optimized_steering()
1978 mlx4_err(dev, "QUERY_FW command failed, aborting\n"); in mlx4_init_fw()
1984 mlx4_err(dev, "Failed to start FW, aborting\n"); in mlx4_init_fw()
2012 mlx4_err(dev, "QUERY_DEV_CAP command failed, aborting\n"); in mlx4_init_hca()
2025 mlx4_err(dev, "Fail to get physical port id\n"); in mlx4_init_hca()
2062 mlx4_err(dev, "INIT_HCA command failed, aborting\n"); in mlx4_init_hca()
2069 mlx4_err(dev, "QUERY_FUNC command failed, aborting.\n"); in mlx4_init_hca()
2086 mlx4_err(dev, "QUERY_HCA command failed, disable timestamp\n"); in mlx4_init_hca()
2098 mlx4_err(dev, in mlx4_init_hca()
2106 mlx4_err(dev, "Failed to map internal clock. Timestamping is not supported\n"); in mlx4_init_hca()
2131 mlx4_err(dev, "Failed to initialize slave\n"); in mlx4_init_hca()
2137 mlx4_err(dev, "Failed to obtain slave caps\n"); in mlx4_init_hca()
2151 mlx4_err(dev, "QUERY_ADAPTER command failed, aborting\n"); in mlx4_init_hca()
2158 mlx4_err(dev, "Failed to query CONFIG_DEV parameters\n"); in mlx4_init_hca()
2303 mlx4_err(dev, "Failed to initialize user access region table, aborting\n"); in mlx4_setup_hca()
2309 mlx4_err(dev, "Failed to allocate driver access region, aborting\n"); in mlx4_setup_hca()
2315 mlx4_err(dev, "Couldn't map kernel access region, aborting\n"); in mlx4_setup_hca()
2322 mlx4_err(dev, "Failed to initialize protection domain table, aborting\n"); in mlx4_setup_hca()
2328 mlx4_err(dev, "Failed to initialize reliable connection domain table, aborting\n"); in mlx4_setup_hca()
2334 mlx4_err(dev, "Failed to initialize memory region table, aborting\n"); in mlx4_setup_hca()
2341 mlx4_err(dev, "Failed to initialize multicast group table, aborting\n"); in mlx4_setup_hca()
2346 mlx4_err(dev, "Failed in config_mad_demux, aborting\n"); in mlx4_setup_hca()
2353 mlx4_err(dev, "Failed to initialize event queue table, aborting\n"); in mlx4_setup_hca()
2359 mlx4_err(dev, "Failed to switch to event-driven firmware commands, aborting\n"); in mlx4_setup_hca()
2370 mlx4_err(dev, "NOP command failed to generate interrupt (IRQ %d), aborting\n", in mlx4_setup_hca()
2372 mlx4_err(dev, "BIOS or ACPI interrupt routing problem?\n"); in mlx4_setup_hca()
2382 mlx4_err(dev, "Failed to initialize completion queue table, aborting\n"); in mlx4_setup_hca()
2388 mlx4_err(dev, "Failed to initialize shared receive queue table, aborting\n"); in mlx4_setup_hca()
2394 mlx4_err(dev, "Failed to initialize queue pair table, aborting\n"); in mlx4_setup_hca()
2400 mlx4_err(dev, "Failed to initialize counters table, aborting\n"); in mlx4_setup_hca()
2433 mlx4_err(dev, "Failed to set port %d, aborting\n", in mlx4_setup_hca()
2562 mlx4_err(dev, "Failed to create file for port %d\n", port); in mlx4_init_port_info()
2580 mlx4_err(dev, "Failed to create mtu file for port %d\n", port); in mlx4_init_port_info()
2670 mlx4_err(dev, "Failed to obtain ownership bit\n"); in mlx4_get_ownership()
2690 mlx4_err(dev, "Failed to obtain ownership bit\n"); in mlx4_free_ownership()
2718 … mlx4_err(dev, "SR-IOV was already enabled, but with num_vfs (%d) different than requested (%d)\n", in mlx4_enable_sriov()
2726 mlx4_err(dev, "Failed to allocate memory for VFs\n"); in mlx4_enable_sriov()
2735 mlx4_err(dev, "Failed to enable SR-IOV, continuing without SR-IOV (err = %d)\n", in mlx4_enable_sriov()
2766 mlx4_err(dev, "Requested %d VFs, but FW does not support more than 64\n", in mlx4_check_dev_cap()
2830 mlx4_err(dev, "Failed to reset HCA, aborting\n"); in mlx4_load_one()
2851 mlx4_err(dev, "Failed to init command interface, aborting\n"); in mlx4_load_one()
2866 mlx4_err(dev, "Failed to init slave mfunc interface, aborting\n"); in mlx4_load_one()
2874 mlx4_err(dev, "Failed to init fw, aborting.\n"); in mlx4_load_one()
2890 mlx4_err(dev, "QUERY_DEV_CAP command failed, aborting.\n"); in mlx4_load_one()
2906 mlx4_err(dev, "Invalid SRIOV state\n"); in mlx4_load_one()
2911 mlx4_err(dev, "Failed to reset HCA, aborting.\n"); in mlx4_load_one()
2924 mlx4_err(dev, "QUERY_DEV_CAP command failed, aborting.\n"); in mlx4_load_one()
2968 mlx4_err(dev, "Failed to init VHCR command interface, aborting\n"); in mlx4_load_one()
2976 mlx4_err(dev, "Invalid SRIOV state\n"); in mlx4_load_one()
2998 mlx4_err(dev, in mlx4_load_one()
3006 mlx4_err(dev, in mlx4_load_one()
3030 mlx4_err(dev, "Failed to init master mfunc interface, aborting.\n"); in mlx4_load_one()
3046 mlx4_err(dev, "INTx is not supported in multi-function mode, aborting\n"); in mlx4_load_one()
3076 mlx4_err(dev, " Failed to arm comm channel eq: %x\n", in mlx4_load_one()
3531 mlx4_err(dev, "%s: ERROR: mlx4_load_one failed, pci_name=%s, err=%d\n", in mlx4_restart_one()
3539 mlx4_err(dev, "could not restore original port types (%d)\n", in mlx4_restart_one()
3598 mlx4_err(persist->dev, "mlx4_pci_err_detected was called\n"); in mlx4_pci_err_detected()
3622 mlx4_err(dev, "mlx4_pci_slot_reset was called\n"); in mlx4_pci_slot_reset()
3625 mlx4_err(dev, "Can not re-enable device, ret=%d\n", ret); in mlx4_pci_slot_reset()
3641 mlx4_err(dev, "%s: mlx4_load_one failed, ret=%d\n", in mlx4_pci_slot_reset()
3650 mlx4_err(dev, "could not restore original port types (%d)\n", ret); in mlx4_pci_slot_reset()