142 		hw_dbg("PHY Address %d is out of range\n", offset);  in igb_read_phy_reg_mdic()
168 		hw_dbg("MDI Read did not complete\n");  in igb_read_phy_reg_mdic()
173 		hw_dbg("MDI Error\n");  in igb_read_phy_reg_mdic()
198 		hw_dbg("PHY Address %d is out of range\n", offset);  in igb_write_phy_reg_mdic()
225 		hw_dbg("MDI Write did not complete\n");  in igb_write_phy_reg_mdic()
230 		hw_dbg("MDI Error\n");  in igb_write_phy_reg_mdic()
271 		hw_dbg("I2CCMD Read did not complete\n");  in igb_read_phy_reg_i2c()
275 		hw_dbg("I2CCMD Error bit set\n");  in igb_read_phy_reg_i2c()
301 		hw_dbg("PHY I2C Address %d is out of range.\n",  in igb_write_phy_reg_i2c()
328 		hw_dbg("I2CCMD Write did not complete\n");  in igb_write_phy_reg_i2c()
332 		hw_dbg("I2CCMD Error bit set\n");  in igb_write_phy_reg_i2c()
359 		hw_dbg("I2CCMD command address exceeds upper limit\n");  in igb_read_sfp_data_byte()
380 		hw_dbg("I2CCMD Read did not complete\n");  in igb_read_sfp_data_byte()
384 		hw_dbg("I2CCMD Error bit set\n");  in igb_read_sfp_data_byte()
491 			hw_dbg("Error resetting the PHY.\n");  in igb_copper_link_setup_82580()
633 		hw_dbg("Error committing the PHY changes\n");  in igb_copper_link_setup_m88()
710 			hw_dbg("Error committing the PHY changes\n");  in igb_copper_link_setup_m88_gen2()
726 		hw_dbg("Error committing the PHY changes\n");  in igb_copper_link_setup_m88_gen2()
756 		hw_dbg("Error resetting the PHY.\n");  in igb_copper_link_setup_igp()
773 			hw_dbg("Error Disabling LPLU D3\n");  in igb_copper_link_setup_igp()
781 		hw_dbg("Error Disabling LPLU D0\n");  in igb_copper_link_setup_igp()
898 	hw_dbg("Reconfiguring auto-neg advertisement params\n");  in igb_copper_link_autoneg()
901 		hw_dbg("Error Setting up Auto-Negotiation\n");  in igb_copper_link_autoneg()
904 	hw_dbg("Restarting Auto-Neg\n");  in igb_copper_link_autoneg()
924 			hw_dbg("Error while waiting for autoneg to complete\n");  in igb_copper_link_autoneg()
983 	hw_dbg("autoneg_advertised %x\n", phy->autoneg_advertised);  in igb_phy_setup_autoneg()
987 		hw_dbg("Advertise 10mb Half duplex\n");  in igb_phy_setup_autoneg()
993 		hw_dbg("Advertise 10mb Full duplex\n");  in igb_phy_setup_autoneg()
999 		hw_dbg("Advertise 100mb Half duplex\n");  in igb_phy_setup_autoneg()
1005 		hw_dbg("Advertise 100mb Full duplex\n");  in igb_phy_setup_autoneg()
1011 		hw_dbg("Advertise 1000mb Half duplex request denied!\n");  in igb_phy_setup_autoneg()
1015 		hw_dbg("Advertise 1000mb Full duplex\n");  in igb_phy_setup_autoneg()
1069 		hw_dbg("Flow control param set incorrectly\n");  in igb_phy_setup_autoneg()
1078 	hw_dbg("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg);  in igb_phy_setup_autoneg()
1117 		hw_dbg("Forcing Speed and Duplex\n");  in igb_setup_copper_link()
1120 			hw_dbg("Error Forcing Speed and Duplex\n");  in igb_setup_copper_link()
1133 		hw_dbg("Valid link established!!!\n");  in igb_setup_copper_link()
1137 		hw_dbg("Unable to establish link!!!\n");  in igb_setup_copper_link()
1183 	hw_dbg("IGP PSCR: %X\n", phy_data);  in igb_phy_force_speed_duplex_igp()
1188 		hw_dbg("Waiting for forced speed/duplex link on IGP phy.\n");  in igb_phy_force_speed_duplex_igp()
1195 			hw_dbg("Link taking longer than expected.\n");  in igb_phy_force_speed_duplex_igp()
1240 		hw_dbg("M88E1000 PSCR: %X\n", phy_data);  in igb_phy_force_speed_duplex_m88()
1259 		hw_dbg("Waiting for forced speed/duplex link on M88 phy.\n");  in igb_phy_force_speed_duplex_m88()
1280 				hw_dbg("Link taking longer than expected.\n");  in igb_phy_force_speed_duplex_m88()
1372 		hw_dbg("Half Duplex\n");  in igb_phy_force_speed_duplex_setup()
1376 		hw_dbg("Full Duplex\n");  in igb_phy_force_speed_duplex_setup()
1384 		hw_dbg("Forcing 100mb\n");  in igb_phy_force_speed_duplex_setup()
1389 		hw_dbg("Forcing 10mb\n");  in igb_phy_force_speed_duplex_setup()
1916 		hw_dbg("Phy info is only valid for copper media\n");  in igb_get_phy_info_m88()
1926 		hw_dbg("Phy info is only valid if link is up\n");  in igb_get_phy_info_m88()
1996 		hw_dbg("Phy info is only valid if link is up\n");  in igb_get_phy_info_igp()
2122 	hw_dbg("Running IGP 3 PHY init script\n");  in igb_phy_init_script_igp3()
2295 	hw_dbg("I82580_PHY_CTRL_2: %X\n", phy_data);  in igb_phy_force_speed_duplex_82580()
2300 		hw_dbg("Waiting for forced speed/duplex link on 82580 phy\n");  in igb_phy_force_speed_duplex_82580()
2307 			hw_dbg("Link taking longer than expected.\n");  in igb_phy_force_speed_duplex_82580()
2340 		hw_dbg("Phy info is only valid if link is up\n");  in igb_get_phy_info_82580()