175 	hw_dbg("Programming MAC Address into RAR[0]\n");  in igb_init_rx_addrs()
180 	hw_dbg("Clearing RAR[1-%u]\n", rar_count-1);  in igb_init_rx_addrs()
249 		hw_dbg("NVM Read Error\n");  in igb_check_alt_mac_addr()
269 			hw_dbg("NVM Read Error\n");  in igb_check_alt_mac_addr()
279 		hw_dbg("Ignoring Alternate Mac Address with MC bit set\n");  in igb_check_alt_mac_addr()
577 		hw_dbg("Error configuring flow control\n");  in igb_check_for_copper_link()
618 	hw_dbg("After fix-ups FlowControl is now = %x\n", hw->fc.current_mode);  in igb_setup_link()
630 	hw_dbg("Initializing the Flow Control address, type and timer regs\n");  in igb_setup_link()
732 		hw_dbg("NVM Read Error\n");  in igb_set_default_fc()
782 	hw_dbg("hw->fc.current_mode = %u\n", hw->fc.current_mode);  in igb_force_mac_fc()
800 		hw_dbg("Flow control param set incorrectly\n");  in igb_force_mac_fc()
842 		hw_dbg("Error forcing flow control settings\n");  in igb_config_fc_after_link_up()
866 			hw_dbg("Copper PHY and Auto Neg has not completed.\n");  in igb_config_fc_after_link_up()
928 				hw_dbg("Flow Control = FULL.\n");  in igb_config_fc_after_link_up()
931 				hw_dbg("Flow Control = RX PAUSE frames only.\n");  in igb_config_fc_after_link_up()
946 			hw_dbg("Flow Control = TX PAUSE frames only.\n");  in igb_config_fc_after_link_up()
960 			hw_dbg("Flow Control = RX PAUSE frames only.\n");  in igb_config_fc_after_link_up()
986 			hw_dbg("Flow Control = NONE.\n");  in igb_config_fc_after_link_up()
989 			hw_dbg("Flow Control = RX PAUSE frames only.\n");  in igb_config_fc_after_link_up()
998 			hw_dbg("Error getting link speed and duplex\n");  in igb_config_fc_after_link_up()
1010 			hw_dbg("Error forcing flow control settings\n");  in igb_config_fc_after_link_up()
1027 			hw_dbg("PCS Auto Neg has not completed.\n");  in igb_config_fc_after_link_up()
1083 				hw_dbg("Flow Control = FULL.\n");  in igb_config_fc_after_link_up()
1086 				hw_dbg("Flow Control = Rx PAUSE frames only.\n");  in igb_config_fc_after_link_up()
1101 			hw_dbg("Flow Control = Tx PAUSE frames only.\n");  in igb_config_fc_after_link_up()
1115 			hw_dbg("Flow Control = Rx PAUSE frames only.\n");  in igb_config_fc_after_link_up()
1121 			hw_dbg("Flow Control = NONE.\n");  in igb_config_fc_after_link_up()
1133 			hw_dbg("Error forcing flow control settings\n");  in igb_config_fc_after_link_up()
1159 		hw_dbg("1000 Mbs, ");  in igb_get_speed_and_duplex_copper()
1162 		hw_dbg("100 Mbs, ");  in igb_get_speed_and_duplex_copper()
1165 		hw_dbg("10 Mbs, ");  in igb_get_speed_and_duplex_copper()
1170 		hw_dbg("Full Duplex\n");  in igb_get_speed_and_duplex_copper()
1173 		hw_dbg("Half Duplex\n");  in igb_get_speed_and_duplex_copper()
1203 		hw_dbg("Driver can't access device - SMBI bit is set.\n");  in igb_get_hw_semaphore()
1223 		hw_dbg("Driver can't access the NVM\n");  in igb_get_hw_semaphore()
1269 		hw_dbg("Auto read by HW from NVM has not completed.\n");  in igb_get_auto_rd_done()
1292 		hw_dbg("NVM Read Error\n");  in igb_valid_led_default()
1492 		hw_dbg("Master requests are pending.\n");  in igb_disable_pcie_master()
1517 		hw_dbg("Invalid MDI setting detected\n");  in igb_validate_mdi_setting()
1556 		hw_dbg("Reg %08x did not indicate ready\n", reg);  in igb_write_8bit_ctrl_reg()