142 		e_dbg("PHY Address %d is out of range\n", offset);  in e1000e_read_phy_reg_mdic()
167 		e_dbg("MDI Read did not complete\n");  in e1000e_read_phy_reg_mdic()
171 		e_dbg("MDI Error\n");  in e1000e_read_phy_reg_mdic()
175 		e_dbg("MDI Read offset error - requested %d, returned %d\n",  in e1000e_read_phy_reg_mdic()
205 		e_dbg("PHY Address %d is out of range\n", offset);  in e1000e_write_phy_reg_mdic()
231 		e_dbg("MDI Write did not complete\n");  in e1000e_write_phy_reg_mdic()
235 		e_dbg("MDI Error\n");  in e1000e_write_phy_reg_mdic()
239 		e_dbg("MDI Write offset error - requested %d, returned %d\n",  in e1000e_write_phy_reg_mdic()
316 	e_dbg("Setting page 0x%x\n", page);  in e1000_set_page_igp()
758 				e_dbg("Error committing the PHY changes\n");  in e1000e_copper_link_setup_m88()
814 			e_dbg("Error committing the PHY changes\n");  in e1000e_copper_link_setup_m88()
850 		e_dbg("Error resetting the PHY.\n");  in e1000e_copper_link_setup_igp()
863 			e_dbg("Error Disabling LPLU D0\n");  in e1000e_copper_link_setup_igp()
972 	e_dbg("autoneg_advertised %x\n", phy->autoneg_advertised);  in e1000_phy_setup_autoneg()
976 		e_dbg("Advertise 10mb Half duplex\n");  in e1000_phy_setup_autoneg()
982 		e_dbg("Advertise 10mb Full duplex\n");  in e1000_phy_setup_autoneg()
988 		e_dbg("Advertise 100mb Half duplex\n");  in e1000_phy_setup_autoneg()
994 		e_dbg("Advertise 100mb Full duplex\n");  in e1000_phy_setup_autoneg()
1000 		e_dbg("Advertise 1000mb Half duplex request denied!\n");  in e1000_phy_setup_autoneg()
1004 		e_dbg("Advertise 1000mb Full duplex\n");  in e1000_phy_setup_autoneg()
1061 		e_dbg("Flow control param set incorrectly\n");  in e1000_phy_setup_autoneg()
1069 	e_dbg("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg);  in e1000_phy_setup_autoneg()
1103 	e_dbg("Reconfiguring auto-neg advertisement params\n");  in e1000_copper_link_autoneg()
1106 		e_dbg("Error Setting up Auto-Negotiation\n");  in e1000_copper_link_autoneg()
1109 	e_dbg("Restarting Auto-Neg\n");  in e1000_copper_link_autoneg()
1129 			e_dbg("Error while waiting for autoneg to complete\n");  in e1000_copper_link_autoneg()
1164 		e_dbg("Forcing Speed and Duplex\n");  in e1000e_setup_copper_link()
1167 			e_dbg("Error Forcing Speed and Duplex\n");  in e1000e_setup_copper_link()
1181 		e_dbg("Valid link established!!!\n");  in e1000e_setup_copper_link()
1185 		e_dbg("Unable to establish link!!!\n");  in e1000e_setup_copper_link()
1230 	e_dbg("IGP PSCR: %X\n", phy_data);  in e1000e_phy_force_speed_duplex_igp()
1235 		e_dbg("Waiting for forced speed/duplex link on IGP phy.\n");  in e1000e_phy_force_speed_duplex_igp()
1243 			e_dbg("Link taking longer than expected.\n");  in e1000e_phy_force_speed_duplex_igp()
1282 	e_dbg("M88E1000 PSCR: %X\n", phy_data);  in e1000e_phy_force_speed_duplex_m88()
1302 		e_dbg("Waiting for forced speed/duplex link on M88 phy.\n");  in e1000e_phy_force_speed_duplex_m88()
1311 				e_dbg("Link taking longer than expected.\n");  in e1000e_phy_force_speed_duplex_m88()
1399 	e_dbg("IFE PMC: %X\n", data);  in e1000_phy_force_speed_duplex_ife()
1404 		e_dbg("Waiting for forced speed/duplex link on IFE phy.\n");  in e1000_phy_force_speed_duplex_ife()
1412 			e_dbg("Link taking longer than expected.\n");  in e1000_phy_force_speed_duplex_ife()
1459 		e_dbg("Half Duplex\n");  in e1000e_phy_force_speed_duplex_setup()
1463 		e_dbg("Full Duplex\n");  in e1000e_phy_force_speed_duplex_setup()
1471 		e_dbg("Forcing 100mb\n");  in e1000e_phy_force_speed_duplex_setup()
1475 		e_dbg("Forcing 10mb\n");  in e1000e_phy_force_speed_duplex_setup()
1905 		e_dbg("Phy info is only valid for copper media\n");  in e1000e_get_phy_info_m88()
1914 		e_dbg("Phy info is only valid if link is up\n");  in e1000e_get_phy_info_m88()
1980 		e_dbg("Phy info is only valid if link is up\n");  in e1000e_get_phy_info_igp()
2038 		e_dbg("Phy info is only valid if link is up\n");  in e1000_get_phy_info_ife()
2161 	e_dbg("Running IGP 3 PHY init script\n");  in e1000e_phy_init_script_igp3()
2565 		e_dbg("Could not set Port Control page\n");  in e1000_enable_phy_wakeup_reg_access_bm()
2571 		e_dbg("Could not read PHY register %d.%d\n",  in e1000_enable_phy_wakeup_reg_access_bm()
2585 		e_dbg("Could not write PHY register %d.%d\n",  in e1000_enable_phy_wakeup_reg_access_bm()
2614 		e_dbg("Could not set Port Control page\n");  in e1000_disable_phy_wakeup_reg_access_bm()
2621 		e_dbg("Could not restore PHY register %d.%d\n",  in e1000_disable_phy_wakeup_reg_access_bm()
2663 		e_dbg("Attempting to access page %d while gig enabled.\n",  in e1000_access_phy_wakeup_reg_bm()
2670 			e_dbg("Could not enable PHY wakeup reg access\n");  in e1000_access_phy_wakeup_reg_bm()
2675 	e_dbg("Accessing PHY page %d reg 0x%x\n", page, reg);  in e1000_access_phy_wakeup_reg_bm()
2680 		e_dbg("Could not write address opcode to page %d\n", page);  in e1000_access_phy_wakeup_reg_bm()
2695 		e_dbg("Could not access PHY reg %d.%d\n", page, reg);  in e1000_access_phy_wakeup_reg_bm()
2796 	e_dbg("reading PHY page %d (or 0x%x shifted) reg 0x%x\n", page,  in __e1000_read_phy_reg_hv()
2919 	e_dbg("writing PHY page %d (or 0x%x shifted) reg 0x%x\n", page,  in __e1000_write_phy_reg_hv()
3018 		e_dbg("Could not write the Address Offset port register\n");  in e1000_access_phy_debug_regs_hv()
3029 		e_dbg("Could not access the Data port register\n");  in e1000_access_phy_debug_regs_hv()
3132 		e_dbg("Waiting for forced speed/duplex link on 82577 phy\n");  in e1000_phy_force_speed_duplex_82577()
3140 			e_dbg("Link taking longer than expected.\n");  in e1000_phy_force_speed_duplex_82577()
3171 		e_dbg("Phy info is only valid if link is up\n");  in e1000_get_phy_info_82577()