Lines Matching refs:printk
394 printk(KERN_DEBUG in HFC_outb_debug()
424 printk(KERN_DEBUG in HFC_inb_debug()
446 printk(KERN_DEBUG in HFC_inw_debug()
454 printk(KERN_DEBUG "HFC_wait(chip %d); in %s() line %d\n", in HFC_wait_debug()
738 printk(KERN_DEBUG "Wrote 0x%x to register 0x%x but got back " in vpm_out()
757 printk(KERN_DEBUG "VPM: Chip %d: ver %02x\n", x, ver); in vpm_init()
783 printk(KERN_DEBUG "VPM: A-law mode\n"); in vpm_init()
786 printk(KERN_DEBUG "VPM reg 0x20 is %x\n", reg); in vpm_init()
791 printk(KERN_DEBUG "NLP Thresh is set to %d (0x%x)\n", reg, reg); in vpm_init()
837 printk(KERN_DEBUG "Got interrupt 0x%x from VPM!\n", gpi2); in vpm_check()
879 printk(KERN_NOTICE "vpm_echocan_on called taps [%d] on timeslot %d\n", in vpm_echocan_on()
912 printk(KERN_NOTICE "vpm_echocan_off called on timeslot %d\n", in vpm_echocan_off()
937 printk(KERN_DEBUG "%s: RESYNC(syncmaster=0x%p)\n", in hfcmulti_resync()
943 printk(KERN_DEBUG "using provided controller\n"); in hfcmulti_resync()
966 printk(KERN_DEBUG in hfcmulti_resync()
977 printk(KERN_DEBUG "id=%d (0x%p) = syncronized with " in hfcmulti_resync()
988 printk(KERN_DEBUG "Schedule jatt PLL\n"); in hfcmulti_resync()
995 printk(KERN_DEBUG in hfcmulti_resync()
1002 printk(KERN_DEBUG in hfcmulti_resync()
1007 printk(KERN_DEBUG in hfcmulti_resync()
1017 printk(KERN_ERR "%s no pcm master, this MUST " in hfcmulti_resync()
1033 printk(KERN_DEBUG "%s: GOT sync on card %d" in plxsd_checksync()
1041 printk(KERN_DEBUG "%s: LOST sync on card %d" in plxsd_checksync()
1061 printk(KERN_DEBUG "%s: entered\n", __func__); in release_io_hfcmulti()
1074 printk(KERN_DEBUG "%s: release PLXSD card %d\n", in release_io_hfcmulti()
1090 printk(KERN_DEBUG "%s: PCM off: PLX_GPIO=%x\n", in release_io_hfcmulti()
1113 printk(KERN_DEBUG "%s: done\n", __func__); in release_io_hfcmulti()
1139 printk(KERN_DEBUG "%s: entered\n", __func__); in init_chip()
1143 printk(KERN_INFO "HFC_multi: unknown CHIP_ID:%x\n", (u_int)val); in init_chip()
1148 printk(KERN_INFO in init_chip()
1154 printk(KERN_WARNING in init_chip()
1162 printk(KERN_WARNING "HFC_multi: WARNING: This driver doesn't " in init_chip()
1174 printk(KERN_DEBUG "%s: changing to 128K external RAM\n", in init_chip()
1185 printk(KERN_DEBUG "%s: changing to 512K external RAM\n", in init_chip()
1207 printk(KERN_DEBUG "%s: initializing PLXSD card %d\n", in init_chip()
1224 printk(KERN_DEBUG "%s: slave/term: PLX_GPIO=%x\n", in init_chip()
1242 printk(KERN_DEBUG "%s: card %d is between, so " in init_chip()
1252 printk(KERN_DEBUG in init_chip()
1270 printk(KERN_DEBUG "%s: setting PCM into slave mode\n", in init_chip()
1275 printk(KERN_DEBUG "%s: setting PCM into master mode\n", in init_chip()
1280 printk(KERN_DEBUG "%s: performing PCM auto detect\n", in init_chip()
1315 printk(KERN_DEBUG "%s: master: PLX_GPIO=%x\n", in init_chip()
1321 printk(KERN_DEBUG "%s: slave: PLX_GPIO=%x\n", in init_chip()
1355 printk(KERN_DEBUG in init_chip()
1365 printk(KERN_NOTICE "Setting GPIOs\n"); in init_chip()
1369 printk(KERN_NOTICE "calling vpm_init\n"); in init_chip()
1377 printk(KERN_DEBUG in init_chip()
1386 printk(KERN_DEBUG in init_chip()
1392 printk(KERN_INFO "controller is PCM bus MASTER\n"); in init_chip()
1395 printk(KERN_INFO "controller is PCM bus SLAVE\n"); in init_chip()
1398 printk(KERN_INFO "controller is PCM bus SLAVE " in init_chip()
1405 printk(KERN_ERR "HFC_multi ERROR, getting no 125us " in init_chip()
1411 printk(KERN_INFO "controller is PCM bus SLAVE " in init_chip()
1417 printk(KERN_ERR "HFC_multi ERROR, no clock " in init_chip()
1433 printk(KERN_DEBUG "%s: master: " in init_chip()
1445 printk(KERN_DEBUG "HFC_multi F0_CNT %ld after " in init_chip()
1450 printk(KERN_INFO "controller is PCM bus MASTER " in init_chip()
1468 printk(KERN_DEBUG "%s: reset off: PLX_GPIO=%x\n", in init_chip()
1474 printk(KERN_INFO "controller has given PCM BUS ID %d\n", in init_chip()
1482 printk(KERN_INFO "controller has PCM BUS ID %d " in init_chip()
1497 printk(KERN_DEBUG "%s: enabling DTMF detection " in init_chip()
1544 printk(KERN_DEBUG "%s: setting ST master clock " in init_chip()
1556 printk(KERN_DEBUG "r_irqmsk_misc.2: 0x%x\n", in init_chip()
1572 printk(KERN_DEBUG in init_chip()
1579 printk(KERN_DEBUG "aborting - %d RAM access errors\n", err); in init_chip()
1585 printk(KERN_DEBUG "%s: done\n", __func__); in init_chip()
1853 printk(KERN_DEBUG "%s: dtmf detection irq\n", __func__); in hfcmulti_dtmf()
1864 printk(KERN_DEBUG "%s: dtmf channel %d:", in hfcmulti_dtmf()
1878 printk(" %04x", w_float); in hfcmulti_dtmf()
1897 printk(" %04x", w_float); in hfcmulti_dtmf()
1913 printk(" DTMF ready %08x %08x %08x %08x " in hfcmulti_dtmf()
1922 printk(KERN_DEBUG "%s: No memory for skb\n", in hfcmulti_dtmf()
2004 printk(KERN_DEBUG in hfcmulti_tx()
2037 printk(KERN_DEBUG "%s(card %d): reread z2 because " in hfcmulti_tx()
2061 printk(KERN_DEBUG in hfcmulti_tx()
2095 printk(KERN_DEBUG "%s: buffer empty, so we have " in hfcmulti_tx()
2106 printk(KERN_DEBUG "%s: disconnecting PCM due to " in hfcmulti_tx()
2146 printk(KERN_DEBUG "%s(card %d): fifo(%d) has %d bytes space " in hfcmulti_tx()
2237 printk(KERN_DEBUG in hfcmulti_rx()
2247 printk(KERN_DEBUG "%s(card %d): reread z2 because " in hfcmulti_rx()
2290 printk(KERN_DEBUG "%s(card %d): fifo(%d) reading %d " in hfcmulti_rx()
2298 printk(KERN_DEBUG in hfcmulti_rx()
2316 printk(KERN_DEBUG in hfcmulti_rx()
2325 printk(KERN_DEBUG in hfcmulti_rx()
2339 printk(KERN_DEBUG "%s: No mem\n", in hfcmulti_rx()
2348 printk(KERN_DEBUG "%s(card %d):", in hfcmulti_rx()
2352 printk(" %02x", (*sp)->data[temp++]); in hfcmulti_rx()
2353 printk("\n"); in hfcmulti_rx()
2368 printk(KERN_DEBUG in hfcmulti_rx()
2388 printk(KERN_DEBUG "%s: %s\n", __func__, msg); in signal_state_up()
2412 printk(KERN_DEBUG "Enable SYNC_I\n"); in handle_timer_irq()
2420 printk(KERN_DEBUG "Enable jatt PLL\n"); in handle_timer_irq()
2425 printk(KERN_DEBUG in handle_timer_irq()
2451 printk(KERN_DEBUG in handle_timer_irq()
2513 printk(KERN_DEBUG in handle_timer_irq()
2528 printk(KERN_DEBUG in handle_timer_irq()
2539 printk(KERN_DEBUG in handle_timer_irq()
2549 printk(KERN_DEBUG in handle_timer_irq()
2559 printk(KERN_DEBUG in handle_timer_irq()
2598 printk(KERN_DEBUG "%s: reread " in ph_state_irq()
2631 printk(KERN_DEBUG in ph_state_irq()
2708 printk(KERN_ERR "HFC-multi: Spurious interrupt!\n"); in hfcmulti_interrupt()
2716 printk(KERN_ERR "irq for card %d during irq from " in hfcmulti_interrupt()
2749 printk(KERN_ERR "iq1:%x iq2:%x iq3:%x iq4:%x iq5:%x iq6:%x\n", in hfcmulti_interrupt()
2793 printk(KERN_DEBUG "%s: reread " in hfcmulti_interrupt()
2800 printk(KERN_DEBUG in hfcmulti_interrupt()
2825 printk(KERN_DEBUG "%s: got V_IRQ_PROC -" in hfcmulti_interrupt()
2888 printk(KERN_DEBUG in mode_hfcmulti()
2897 printk(KERN_DEBUG "%s: remove from slot %d (TX)\n", in mode_hfcmulti()
2907 printk(KERN_DEBUG in mode_hfcmulti()
2917 printk(KERN_DEBUG in mode_hfcmulti()
2926 printk(KERN_DEBUG in mode_hfcmulti()
2950 printk(KERN_DEBUG "%s: put channel %d to slot %d bank" in mode_hfcmulti()
2979 printk(KERN_DEBUG "%s: put channel %d to slot %d bank" in mode_hfcmulti()
3029 printk(KERN_DEBUG in mode_hfcmulti()
3033 printk(KERN_DEBUG in mode_hfcmulti()
3178 printk(KERN_DEBUG "%s: protocol not known %x\n", in mode_hfcmulti()
3248 printk(KERN_DEBUG in hfcm_l1callback()
3269 printk(KERN_DEBUG in hfcm_l1callback()
3303 printk(KERN_DEBUG in hfcm_l1callback()
3328 printk(KERN_DEBUG "%s: unknown command %x\n", in hfcm_l1callback()
3373 printk(KERN_DEBUG in handle_dmsg()
3381 printk(KERN_DEBUG in handle_dmsg()
3406 printk(KERN_DEBUG in handle_dmsg()
3413 printk(KERN_DEBUG in handle_dmsg()
3494 printk(KERN_DEBUG "%s: PH_ACTIVATE ch %d (0..32)\n", in handle_bmsg()
3512 printk(KERN_DEBUG in handle_bmsg()
3531 printk(KERN_DEBUG in handle_bmsg()
3538 printk(KERN_DEBUG "%s: HFC_SPL_LOOP_OFF\n", in handle_bmsg()
3543 printk(KERN_ERR in handle_bmsg()
3594 printk(KERN_DEBUG "%s: RX_OFF request (nr=%d off=%d)\n", in channel_bctrl()
3604 printk(KERN_DEBUG "%s: HW_FEATURE request\n", in channel_bctrl()
3627 printk(KERN_DEBUG in channel_bctrl()
3637 printk(KERN_WARNING in channel_bctrl()
3647 printk(KERN_DEBUG "%s: HFC_PCM_DISC\n", in channel_bctrl()
3654 printk(KERN_DEBUG "%s: HFC_CONF_JOIN conf %d\n", in channel_bctrl()
3659 printk(KERN_WARNING in channel_bctrl()
3667 printk(KERN_DEBUG "%s: HFC_CONF_SPLIT\n", __func__); in channel_bctrl()
3672 printk(KERN_DEBUG "%s: HFC_ECHOCAN_ON\n", __func__); in channel_bctrl()
3681 printk(KERN_DEBUG "%s: HFC_ECHOCAN_OFF\n", in channel_bctrl()
3704 printk(KERN_DEBUG "%s: cmd:%x %p\n", in hfcm_bctrl()
3721 printk(KERN_WARNING "%s: unknown prim(%x)\n", in hfcm_bctrl()
3739 printk(KERN_WARNING "%s: ERROR given dch is NULL\n", __func__); in ph_state_change()
3748 printk(KERN_DEBUG in ph_state_change()
3753 printk(KERN_DEBUG in ph_state_change()
3786 printk(KERN_DEBUG in ph_state_change()
3809 printk(KERN_DEBUG "%s: S/T NT newstate %x\n", in ph_state_change()
3869 printk(KERN_DEBUG "%s: entered\n", __func__); in hfcmulti_initmode()
3924 printk(KERN_DEBUG "%s: E1 port is NT-mode\n", in hfcmulti_initmode()
3930 printk(KERN_DEBUG "%s: E1 port is TE-mode\n", in hfcmulti_initmode()
3946 printk(KERN_DEBUG in hfcmulti_initmode()
3954 printk(KERN_DEBUG in hfcmulti_initmode()
3961 printk(KERN_DEBUG "%s: E1 port is " in hfcmulti_initmode()
4006 printk(KERN_DEBUG in hfcmulti_initmode()
4015 printk(KERN_DEBUG in hfcmulti_initmode()
4055 printk("%s: done\n", __func__); in hfcmulti_initmode()
4067 printk(KERN_DEBUG "%s: dev(%d) open from %p\n", __func__, in open_dchannel()
4074 printk(KERN_DEBUG "%s: change protocol %x to %x\n", in open_dchannel()
4096 printk(KERN_WARNING "%s:cannot get module\n", __func__); in open_dchannel()
4117 printk(KERN_ERR "%s:internal error ch %d has no bch\n", in open_bchannel()
4127 printk(KERN_WARNING "%s:cannot get module\n", __func__); in open_bchannel()
4149 printk(KERN_DEBUG "%s: MISDN_CTRL_HFC_WD_INIT mode %s" in channel_dctrl()
4169 printk(KERN_DEBUG "%s: MISDN_CTRL_HFC_WD_RESET\n", in channel_dctrl()
4177 printk(KERN_WARNING "%s: unknown Op %x\n", in channel_dctrl()
4196 printk(KERN_DEBUG "%s: cmd:%x %p\n", in hfcm_dctrl()
4226 printk(KERN_DEBUG "%s: dev(%d) close from %p\n", in hfcm_dctrl()
4238 printk(KERN_DEBUG "%s: unknown command %x\n", in hfcm_dctrl()
4271 printk(KERN_DEBUG "%s: entered\n", __func__); in init_card()
4281 printk(KERN_WARNING "mISDN: Could not get interrupt %d.\n", in init_card()
4296 printk(KERN_DEBUG "%s: IRQ %d count %d\n", in init_card()
4317 printk(KERN_DEBUG "%s: IRQ %d count %d\n", in init_card()
4321 printk(KERN_DEBUG "%s: done\n", __func__); in init_card()
4326 printk(KERN_INFO "ignoring missing interrupts\n"); in init_card()
4330 printk(KERN_ERR "HFC PCI: IRQ(%d) getting no interrupts during init.\n", in init_card()
4344 printk(KERN_DEBUG "%s: free irq %d\n", __func__, hc->irq); in init_card()
4351 printk(KERN_DEBUG "%s: done (err=%d)\n", __func__, err); in init_card()
4365 printk(KERN_INFO in setup_pci()
4381 printk(KERN_WARNING "HFC-multi: No IRQ for PCI card found.\n"); in setup_pci()
4385 printk(KERN_WARNING "HFC-multi: Error enabling PCI card.\n"); in setup_pci()
4413 printk(KERN_WARNING in setup_pci()
4421 printk(KERN_WARNING in setup_pci()
4427 printk(KERN_INFO in setup_pci()
4434 printk(KERN_WARNING in setup_pci()
4442 printk(KERN_WARNING "HFC-multi: failed to remap io " in setup_pci()
4448 printk(KERN_INFO in setup_pci()
4464 printk(KERN_WARNING in setup_pci()
4472 printk(KERN_WARNING in setup_pci()
4478 printk(KERN_INFO "card %d: defined at MEMBASE %#lx (%#lx) IRQ " in setup_pci()
4492 printk(KERN_WARNING in setup_pci()
4499 printk(KERN_WARNING "HFC-multi: failed to request " in setup_pci()
4506 printk(KERN_INFO in setup_pci()
4513 printk(KERN_WARNING "HFC-multi: Invalid IO mode.\n"); in setup_pci()
4541 printk(KERN_DEBUG "%s: entered for port %d\n", in release_port()
4545 printk(KERN_WARNING "%s: ERROR port out of range (%d).\n", in release_port()
4551 printk(KERN_DEBUG "%s: releasing port=%d\n", in release_port()
4583 printk(KERN_DEBUG in release_port()
4605 printk(KERN_DEBUG in release_port()
4619 printk(KERN_DEBUG in release_port()
4636 printk(KERN_DEBUG "%s: free port %d channel D(%d)\n", __func__, in release_port()
4642 printk(KERN_DEBUG "%s: done!\n", __func__); in release_port()
4652 printk(KERN_DEBUG "%s: release card (%d) entered\n", in release_card()
4666 printk(KERN_DEBUG "%s: free irq %d (hc=%p)\n", in release_card()
4675 printk(KERN_DEBUG "%s: disable all channels (d and b)\n", in release_card()
4690 printk(KERN_DEBUG "%s: remove instance from list\n", in release_card()
4695 printk(KERN_DEBUG "%s: delete instance\n", __func__); in release_card()
4700 printk(KERN_DEBUG "%s: card successfully removed\n", in release_card()
4710 printk(KERN_INFO in init_e1_port_hw()
4715 printk(KERN_DEBUG in init_e1_port_hw()
4728 printk(KERN_DEBUG "%s: PORT set " in init_e1_port_hw()
4737 printk(KERN_DEBUG "%s: PORT set " in init_e1_port_hw()
4746 printk(KERN_DEBUG in init_e1_port_hw()
4756 printk(KERN_DEBUG in init_e1_port_hw()
4766 printk(KERN_DEBUG "%s: PORT turn on CRC4 report:" in init_e1_port_hw()
4773 printk(KERN_DEBUG "%s: PORT turn off CRC4" in init_e1_port_hw()
4780 printk(KERN_DEBUG "%s: PORT force getting clock from " in init_e1_port_hw()
4787 printk(KERN_DEBUG "%s: PORT force putting clock to " in init_e1_port_hw()
4795 printk(KERN_DEBUG "%s: PORT disable JATT PLL on " in init_e1_port_hw()
4804 printk(KERN_DEBUG in init_e1_port_hw()
4842 printk(KERN_ERR "%s: no memory for bchannel\n", in init_e1_port()
4849 printk(KERN_ERR "%s: no memory for coeffs\n", in init_e1_port()
4915 printk(KERN_ERR "%s: no memory for bchannel\n", in init_multi_port()
4922 printk(KERN_ERR "%s: no memory for coeffs\n", in init_multi_port()
4944 printk(KERN_DEBUG in init_multi_port()
4949 printk(KERN_ERR "Error: Master clock " in init_multi_port()
4957 printk(KERN_ERR "Error: Master clock " in init_multi_port()
4969 printk(KERN_DEBUG in init_multi_port()
4979 printk(KERN_DEBUG in init_multi_port()
5017 printk(KERN_ERR "too many cards (max=%d).\n", in hfcmulti_init()
5022 printk(KERN_WARNING "HFC-MULTI: Card '%s:%s' type %d found but " in hfcmulti_init()
5026 printk(KERN_WARNING "HFC-MULTI: Load module without parameters " in hfcmulti_init()
5031 printk(KERN_DEBUG "%s: Registering %s:%s chip type %d (0x%x)\n", in hfcmulti_init()
5038 printk(KERN_ERR "No kmem for HFC-Multi card\n"); in hfcmulti_init()
5059 printk(KERN_INFO in hfcmulti_init()
5066 printk(KERN_INFO in hfcmulti_init()
5088 printk(KERN_ERR "HFCMULTI error: silence_data too small, " in hfcmulti_init()
5121 printk(KERN_NOTICE "Watchdog enabled\n"); in hfcmulti_init()
5132 printk(KERN_WARNING "Embedded IO Mode not selected\n"); in hfcmulti_init()
5156 printk(KERN_ERR "too many ports (max=%d).\n", in hfcmulti_init()
5166 printk(KERN_DEBUG in hfcmulti_init()
5209 printk(KERN_INFO "%s: %s DIPs(0x%x) jumpers(0x%x)\n", in hfcmulti_init()
5231 printk(KERN_INFO "%s: %s DIPs(0x%x)\n", in hfcmulti_init()
5240 printk(KERN_INFO "%s: %s DIPs(0x%x)\n", in hfcmulti_init()
5258 printk(KERN_ERR "init card returns %d\n", ret_err); in hfcmulti_init()
5283 printk(KERN_INFO "removing hfc_multi card vendor:%x " in hfc_remove_pci()
5294 printk(KERN_DEBUG "%s: drvdata already removed\n", in hfc_remove_pci()
5455 printk(KERN_ERR in hfcmulti_probe()
5460 printk(KERN_ERR in hfcmulti_probe()
5468 printk(KERN_INFO "%d devices registered\n", HFC_cnt); in hfcmulti_probe()
5497 printk(KERN_INFO "mISDN: HFC-multi driver %s\n", HFC_MULTI_VERSION); in HFCmulti_init()
5500 printk(KERN_DEBUG "%s: IRQ_DEBUG IS ENABLED!\n", __func__); in HFCmulti_init()
5507 printk(KERN_DEBUG "%s: init entered\n", __func__); in HFCmulti_init()
5533 printk(KERN_ERR in HFCmulti_init()
5565 printk(KERN_ERR "error registering embedded driver: " in HFCmulti_init()
5570 printk(KERN_INFO "%d devices registered\n", HFC_cnt); in HFCmulti_init()
5576 printk(KERN_ERR "error registering pci driver: %x\n", err); in HFCmulti_init()