Lines Matching refs:systems

306 	  This enables support for systems with more than one CPU. If you have
348 	  This allows 32-bit apic IDs (so it can support very large systems),
358 	  For old smp systems that do not have proper acpi support. Newer systems
362 	bool "Support for big SMP systems with more than 8 CPUs"
365 	  This option is needed for the systems that have more than 8 CPUs
378 	  systems out there.)
389 	  If you have one of these systems, or if you want to build a
400 	  systems out there.)
408 	  If you have one of these systems, or if you want to build a
422 	  Adds support for Numascale NumaChip large-SMP systems. Needed to
434 	  Support for ScaleMP vSMP systems.  Say 'Y' here if this kernel is
445 	  This option is needed in order to support SGI Ultraviolet systems.
491 	  Internet Device) platform systems which do not have the PCI legacy
736 	  systems, unlike the TSC, but it is more expensive to access,
758          systems, unlike the TSC, but it is more expensive to access,
783 	  limitations, on systems with more than 3 GB. This is usually needed
786 	  Newer systems typically have a modern AMD IOMMU, supported via
801 	  systems. Needed to run systems with more than 3GB of memory
828 	  Support for software bounce buffers used on x86-64 systems
830 	  which can only access 32-bits of memory can be used on systems
908 	  SMP systems and many recent uniprocessor systems have one.
930 	  interrupt handling is used on systems where the generation of
945 	  increased on these systems.
977 	  systems. These typically need to be enabled explicitly on the command
1164 	  systems.
1182 	  Linux can use up to 64 Gigabytes of physical memory on x86 systems.
1440 	  For systems with a lot of RAM, this can be wasteful of precious
1669 	  This option is only useful on systems that have EFI firmware.
1934 	    automatically on SMP systems. )
2010 	  build time.  On some systems (e.g. embedded ones), it is
2228 	  your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
2236 	  On PCI systems, the BIOS can be used to detect the PCI devices and
2239 	  PCI-based systems don't have any BIOS at all. Linux can also try to
2303 	  PCI hotplug to work on systems with the CNB20LE chipset which do
2330 	  inside your box.  Other bus systems are PCI, EISA, MicroChannel