Lines Matching refs:this

28 	  what YOU choose in this option.  The actual bits used are configured
29 	  separately.  Select this if the LEDs are on port PA.  Some products
38 	  what YOU choose in this option.  The actual bits used are configured
39 	  separately.  Select this if the LEDs are on port PB.  Some products
48 	  what YOU choose in this option.  The actual bits used are configured
49 	  separately.  Select this if the LEDs are on a memory-mapped latch
50 	  using chip select CSP0, this is mapped at 0x90000000.
56 	  Select this option if you don't have any LED at all.
76 	  set this to same as CONFIG_ETRAX_LED1G (normally 2).
86 	  set this to same as CONFIG_ETRAX_LED1G (normally 2).
96 	  set this to same as CONFIG_ETRAX_LED1G (normally 2).
105 	  set this to same as CONFIG_ETRAX_LED1G (normally 2).
114 	  set this to same as CONFIG_ETRAX_LED1G (normally 2).
123 	  set this to same as CONFIG_ETRAX_LED1G (normally 2).
132 	  set this to same as CONFIG_ETRAX_LED1G (normally 2).
141 	  set this to same as CONFIG_ETRAX_LED1G (normally 2).
150 	  set this to same as CONFIG_ETRAX_LED1G (normally 2).
159 	  set this to same as CONFIG_ETRAX_LED1G (normally 2).
168 	  set this to same as CONFIG_ETRAX_LED1G (normally 2).
177 	  set this to same as CONFIG_ETRAX_LED1G (normally 2).
186 	  set this to same as CONFIG_ETRAX_LED1G (normally 2).
195 	  set this to same as CONFIG_ETRAX_LED1G (normally 2).
204 	  set this to same as CONFIG_ETRAX_LED1G (normally 2).
213 	  set this to same as CONFIG_ETRAX_LED1G (normally 2).
222 	  set this to same as CONFIG_ETRAX_LED1G (normally 2).
231 	  set this to same as CONFIG_ETRAX_LED1G (normally 2).
282 	  Enable this if you use SDRAM chips and configure
293 	  chips.  So this value often needs to be different for each Axis
312 	  chips.  So this value often needs to be different for each Axis
361 	  don't need to take that into consideration when setting this option.
377 	  Enable this if ETRAX is used with a power-supply that can be turned