Lines Matching refs:debug

3 USB2 Debug port key and a debug cable, on x86 systems.
5 You need two computers, the 'USB debug key' special gadget and
8   [host/target] <-------> [USB debug key] <-------> [client/console]
12  a.) Host/target system needs to have USB debug port capability.
35 ( If your system does not list a debug port capability then you probably
36   won't be able to use the USB debug key. )
38  b.) You also need a Netchip USB debug cable/key:
49      debug port on the "host/target" system.  You cannot use a USB hub in
50      between the physical debug port and the "host/target" system.
52      The EHCI debug controller is bound to a specific physical USB
55      wired such that the EHCI debug controller is hooked up to the
63      Some hardware vendors do not expose the usb debug port with a
87     On systems with more than one EHCI debug controller you must
88     specify the correct EHCI debug controller number.  The ordering
90     default with no number argument is "0" the first EHCI debug
91     controller.  To use the second EHCI debug controller, you would
114      and find out which port has debug device connected.