Lines Matching refs:loaded
406 - If 0, the protected-mode code is loaded at 0x10000.
407 - If 1, the protected-mode code is loaded at 0x100000.
440 loaded at 0x90000, it gets moved there later in the loading
448 if the real-mode code is loaded at 0x90000.
561 true.) A relocatable kernel that is loaded at an alignment
576 be loaded at any address that satisfies the kernel_alignment field.
578 point to the loaded code, or to a boot loader hook.
806 can be loaded at another address, but it is internally
808 real-mode code must be loaded at 0x90000.
881 loaded at 0x90000 */
901 It should be loaded at address 0x10000 for Image/zImage kernels and
945 An initrd should be loaded. The meaning of <file> is
953 The boot image which was loaded. Again, the meaning of <file>
969 kernel. This means that if you loaded your real-mode kernel code at
973 kernel code (0x9000 if the code is loaded at 0x90000), sp should be
998 switched off, especially if the loaded kernel has the floppy driver as
999 a demand-loaded module!
1042 from offset 0x01f1 of kernel image on should be loaded into struct
1057 32-bit kernel entry point, which is the start address of loaded
1061 disabled; a GDT must be loaded with the descriptors for selectors
1078 loaded into struct boot_params and examined. The end of setup header
1090 kernel could be loaded above 4G.
1093 64-bit kernel entry point, which is the start address of loaded
1097 The range with setup_header.init_size from start address of loaded
1099 a GDT must be loaded with the descriptors for selectors