Lines Matching refs:only

190 		bit 0: Enable crop support. Cropping will take only part of the
213 		bit 0: Enable crop support. Cropping will take only part of the
287 The only difference between the TV and S-Video input is that the TV has a
364 is provided. You can only set the EDID for HDMI inputs. Internally, however,
416 There are three types of VBI capture devices: those that only support raw
417 (undecoded) VBI, those that only support sliced (decoded) VBI and those that
426 The VBI device will only work for the S-Video and TV inputs, it will give
433 There are three types of VBI output devices: those that only support raw
434 (undecoded) VBI, those that only support sliced (decoded) VBI and those that
440 The VBI device will only work for the S-Video output, it will give
461 modes. In the 'Controls' mode the RDS information is stored in read-only
586 	test pattern should be shown, and if so, whether only counters should
633 	This only applies if the CSC Colorbar test pattern is selected,
644 	a Y'CbCr image.	This only applies if the CSC Colorbar test pattern is
652 	encoding when generating the test pattern. This only applies if the CSC
665 	user control to the red color of the test pattern only.
667 Enable Capture Cropping: enables crop support. This control is only present if
671 Enable Capture Composing: enables composing support. This control is only
676 	and downscaling). This control is only present if the ccs_cap_mode
685 Fill Percentage of Frame: can be used to draw only the top X percent
688 	problematic. By drawing only part of the image this CPU load can
697 Enable Output Cropping: enables crop support. This control is only present if
701 Enable Output Composing: enables composing support. This control is only
706 	and downscaling). This control is only present if the ccs_out_mode
714 The following two controls are only valid for video and vbi capture.
730 The following two controls are only valid for video capture.
746 The following controls are only present if the no_error_inj module option
781 	marked as having suffered a fatal error, the only way to recover
824 RDS Music: these are all read-only controls. If RDS Rx I/O Mode is set to
827 	that the vivid implementation of this is pretty basic: they are only
840 	RDS) data instead of RDS (European-style RDS). This affects only the
875 and VBI looping is only supported between S-Video and HDMI inputs and outputs.
876 VBI is only valid for S-Video as it makes no sense for HDMI.
882 Looping is currently supported only between devices created by the same
932 for either raw or sliced VBI. Note that at the moment only CC/XDS (60 Hz formats)
963 only applies to the TV/S-Video/HDMI inputs and outputs. The reason is that
970 (4096 * 4) x (2160 x 4), but it can only scale up or down by a factor of 4 or
993 is set, then the alpha component is only used for the color red and set to
1023 FIELD_ALTERNATE, then only the top or bottom fields will be copied to the overlay.
1025 The overlay only works if you are also capturing at that same time. This is a
1091 Output overlays only work if the driver has been configured to create a
1128   "Controls" RDS Rx I/O Mode as the read-only RDS controls could be updated