Lines Matching refs:which

7 completely by the bt8xx chip, which is common on all boards.  But
11 bttv-cards.c, which holds the information required for each board.
14 log, telling which card type is used.  Like this one:
22 new entries which are not listed yet.  If there isn't one for your
46 (BT848_GPIO_OUT_EN), it says which pins are actively driven by the
52 which does the sound routing.  But every board is a little different.
57 As mentioned above, there is a array which holds the required
68 gpiomask specifies which pins are used to control the audio mux chip.
74 (i.e. which pins must be high/low for tuner/mute/...).  This will be
89 You can have a look at the board to see which of the gpio pins are
101 			out which effect the particular value has).
123 tuner           - which input is the tuner
124 svhs            - which input is svhs (all others are labeled composite)