Lines Matching refs:used

30 The "pxa2xx_spi_master.clock_enable" field is used to enable/disable the
34 The "pxa2xx_spi_master.num_chipselect" field is used to determine the number of
38 be used.  This caused the driver to acquire two DMA channels: rx_channel and
106 used to configure the SSP hardware fifo.  These fields are critical to the
115 The "pxa2xx_spi_chip.dma_burst_size" field is used to configure PXA2xx DMA
122 The "pxa2xx_spi_chip.timeout" fields is used to efficiently handle
128 The "pxa2xx_spi_chip.enable_loopback" field is used to place the SSP porting
133 The "pxa2xx_spi_chip.cs_control" field is used to point to a board specific
138 NOTE: the SPI driver cannot control the chip select if SSPFRM is used, so the
171 	.dma_burst_size = 8, /* Byte wide transfers used so 8 byte bursts */
179 	.dma_burst_size = 8, /* Byte wide transfers used so 8 byte bursts */
218 The following logic is used to determine the type of I/O to be used on