Lines Matching refs:use
142 It's likely that you have some problems when trying to use the sound driver
144 good default configuration to use. Please try to use same I/O, DMA and IRQ
147 If you get an error message when trying to use the driver, please look
160 required by the sound card is in use by some other device/driver.
186 yourself (in this case use the version that is distributed with kernel
199 use with various sound cards.
205 that it's really not necessary to use this method. Please look at
206 Readme of sound driver version 3.0.1 if you still want to use this method.
241 you can use the information included in soundon.log when configuring OSS/Free.
271 For most other "supposed to be SB compatible" cards you have to use other
295 2. Trying to use a PnP (Plug & Play) card just like an ordinary sound card
302 to use some special tricks (see later) to get a PnP card alive. Many PnP cards
326 How to use sound without recompiling kernel and/or sound driver
337 New versions of most sound cards use the so-called ISA PnP protocol for
341 Aztech (some Sound Galaxy models) use PnP technology. The CS4232/4236 audio
378 Yet another way to use PnP cards is to use (commercial) OSS/Linux drivers. See
516 use the standard MSS, MPU401 and OPL3 options with these chips and to
523 required (P133 is minimum). Although SoftOSS does _not_ use MMX
535 recommended to use sampling rates around 22050 or even 16000 kHz.
539 decrease CONFIG_SOFTOSS_VOICES. This makes it possible to use
555 can use the public domain MIDIA patchset available from several ftp
562 if you like to use these patches with SoftOSS included in OSS/Free.
575 NOTE! You will have to use the "old" config script when configuring
591 driver will not work with them. You may want to use OSS/Linux with these
603 in the PnP mode. You will have to use them in MSS mode after having
606 It's possible to use 82C931 with OSS/Free by jumpering it to non-PnP
609 (without need to use isapnptools or DOS to initialize it). All OPTi
615 the lowlevel/ directory. To use it you should enable the
624 NOTE! Don't ever try to use isapnptools with CS4232 since this will just
644 configure the driver use I/O, IRQ and DMA settings
657 the driver to use I/O, IRQ and DMA settings which are known to work.
658 You could usually use the same values than with DOS and/or Windows.
693 DOS based driver initializes the hardware to use known I/O, IRQ and DMA
694 settings. If sound driver is configured to use the same settings, everything
744 (n/y) means 'n'. To use the default value, just hit ENTER. But be careful
758 if you want to use the SB emulation of PAS16. It's also possible to
759 the emulation if you want to use a true SB card together with PAS16
895 are almost certainly PnP ones). With PnP cards you should use isapnptools
898 It's possible to configure these cards to use different I/O, IRQ and
901 a good idea to use the same values than with DOS/Windows. With SB and SB Pro
907 The original (steam) Sound Blaster (versions 1.x and 2.x) use always
912 it's possible to use just one (8 bit) DMA channel by answering the 8 bit
916 It's possible to use two SB16/32/64 at the same time. To do this you should
920 going to use two PnP Sound Blasters, ensure that they are of different model
946 - Hit ctrl-alt-del (or use loadlin) to boot Linux. Don't
948 - If you use the same I/O, IRQ and DMA settings in Linux, the
963 With current driver versions it's also possible to use PAS16 together with
968 With PAS16 you can use two audio device files at the same time. /dev/dsp (and
980 to select the channel as a recording source and to use volume above 10%.
1000 IRQ and DMA numbers for the daughter card. You have to use different I/O
1014 If you have problems in recording with GUS MAX, you could try to use
1024 GUS ACE works too but any attempt to record or to use the MIDI port
1051 use 0x330 as the MPU401 base if you have a AHA1542. The kernel will not boot
1059 program handles these options itself. (You may use the SB, MPU and MSS options
1068 distributed with the DOS/Windows drivers of the card (don't use the mt32.ld).
1084 attempt to use the same IRQ or DMA channels twice.
1088 both the SB driver and the SB mode of ATP to use the same IRQ, DMA and I/O
1105 cards made by Reveal don't work with Linux. They use older revision
1131 MPU401 mode (you have to use different IRQs for both purposes).
1143 driver of the card. You will need to use version 1.30.00 or later
1149 Then you have to select the proper microcode file to use: soundscape.co0
1155 an old card and you will need to use sndscape.co1. For other cards use
1156 soundscape.co0. New Soundscape revisions such as Elite and PnP use
1160 Currently it's possible to use it in Linux only with OSS/Linux
1168 dangerous as long as you don't try to use a file called sndscape.cod.
1170 are terrible), just modify ssinit.c to use another microcode file and try
1171 again. It's possible to use an earlier version of sndscape.co[01] but it
1203 can be enabled by configuring the card to use two DMA channels. Possible
1242 Also remember to enable SB MPU401 support if you want to use the OPL4 mode.
1272 if you want to use MIDI features of ES1688. ES688 doesn't have MPU mode
1280 which use software configurable I/O port relocation feature of the chip.
1283 There are ES1688 based cards which use different interrupt pin assignment than
1295 are compatible with SoundScape and some use the MAD16 chip. You may have
1338 when you use a miroSOUND PCMxx card. The ACI mixer is controlled by
1396 Just use the DOS based driver to initialize the card to a known state, then use
1397 loadlin.exe to boot Linux. If Linux is configured to use the same I/O, IRQ and