Lines Matching refs:settings

289 software selectable IRQ and DMA settings. If the (power on default) values
359 work now. "Proper" means that I/O, IRQ and DMA settings are the same as in
360 DOS. The hard part is to find which settings were used. See the documentation of
644 configure the driver use I/O, IRQ and DMA settings
657 the driver to use I/O, IRQ and DMA settings which are known to work.
659 Using different settings is possible but not recommended since it may cause
694 settings. If sound driver is configured to use the same settings, everything
887 the same settings with DOS/Windows and Linux is recommended. Using
899 DMA settings. Since the possible/default settings have changed between various
948 	- If you use the same I/O, IRQ and DMA settings in Linux, the
1005 GUS MAX uses the same I/O address and IRQ settings than the original GUS
1089 settings.
1259 which initializes the card to match the EEPROM settings when the machine
1261 for all of the settings. Configure driver for MSS, MPU, SB/SB Pro  and OPL3