Lines Matching refs:be

16   - standalone MPU401 support may be required for some cards; for the
18 Since the ALS-007/100/200 are PnP cards, ISAPnP support should probably be
20 be required to configure the card before the sound modules are loaded.
26 section.  This should all be correctly configured by the kernel; if problems
30 synth device can be accessed using the "opl3" module.
33 of the card's resources should be passed to the kernel modules ("sb", "opl3"
34 and "mpu401") using the module parameters.  When configuring an ALS-007, be
36 requires they be different.  For "sb", "io", "irq" and "dma" should be set
38 isapnp.  "dma16" should be explicitly set to "-1" for an ALS-007 since this
41 "mpu_io" should be set to 0.  The "io" parameter of the "opl3" module should
43 working on an ALS-007 card, the "mpu401" module will be required since this
46 inbuilt MPU401 driver would otherwise be fine).  Insert the mpu401 module