Lines Matching refs:to

6 The EMU10K1 chips have a DSP part which can be programmed to support
19 (index 0) for a given card) allows to forward 48kHz, stereo, 16-bit
20 little endian streams without any modifications to the digital output
22 to 8 raw PCM devices operating at 48kHz, 16-bit little endian. It would
23 be easy to add support for multichannel devices to the current code,
27 Look to tram_poke routines in lowlevel/emu10k1/emufx.c for more details.
38 (set to maximal or minimal value without checking of overflow).
43 DAC    - digital to analog converter
44 ADC    - analog to digital converter
51          Each of the synthesizer voices can feed its output to these accumulators
57 This control is used to attenuate samples for left and right PCM FX-bus
59 The result samples are forwarded to the front DAC PCM slots of the AC97 codec.
63 This control is used to attenuate samples for left and right PCM FX-bus
65 The result samples are forwarded to the rear I2S DACs. These DACs operates
70 This control is used to attenuate samples for left and right PCM FX-bus
72 The result is mixed to mono signal (single channel) and forwarded to
77 This control is used to attenuate samples for left and right PCM FX-bus
79 The result is mixed to mono signal (single channel) and forwarded to
85 These controls are used to attenuate samples for left and right PCM FX-bus
87 The result is forwarded to the ADC capture FIFO (thus to the standard capture
92 This control is used to attenuate samples for left and right MIDI FX-bus
94 The result samples are forwarded to the front DAC PCM slots of the AC97 codec.
99 These controls are used to attenuate samples for left and right MIDI FX-bus
101 The result is forwarded to the ADC capture FIFO (thus to the standard capture
106 This control is used to attenuate samples for left and right rear PCM FX-bus
108 The result samples are forwarded to the rear I2S DACs. These DACs operate
114 These controls are used to attenuate samples for left and right rear PCM FX-bus
116 The result is forwarded to the ADC capture FIFO (thus to the standard capture
121 This control is used to attenuate sample for center PCM FX-bus accumulator.
123 to the ??rear?? right DAC PCM slot of the AC97 codec.
127 This control is used to attenuate sample for center PCM FX-bus accumulator.
129 to the ??rear?? left DAC PCM slot of the AC97 codec.
133 This control is used to attenuate samples for left and right front ADC PCM slots
134 of the AC97 codec. The result samples are forwarded to the front DAC PCM
143 This control is used to attenuate samples for left and right front ADC PCM slots
144 of the AC97 codec. The result is forwarded to the ADC capture FIFO (thus to
153 This control is used to attenuate samples from left and right IEC958 TTL
155 forwarded to the front DAC PCM slots of the AC97 codec.
159 This control is used to attenuate samples from left and right IEC958 TTL
161 forwarded to the ADC capture FIFO (thus to the standard capture PCM device).
165 This control is used to attenuate samples from left and right zoom video
167 forwarded to the front DAC PCM slots of the AC97 codec.
171 This control is used to attenuate samples from left and right zoom video
173 forwarded to the ADC capture FIFO (thus to the standard capture PCM device).
177 This control is used to attenuate samples from left and right IEC958 optical
178 digital input. The result samples are forwarded to the front DAC PCM slots
183 This control is used to attenuate samples from left and right IEC958 optical
184 digital inputs. The result samples are forwarded to the ADC capture FIFO
185 (thus to the standard capture PCM device).
189 This control is used to attenuate samples from left and right IEC958 coaxial
190 digital inputs. The result samples are forwarded to the front DAC PCM slots
195 This control is used to attenuate samples from left and right IEC958 coaxial
196 digital inputs. The result samples are forwarded to the ADC capture FIFO
197 (thus to the standard capture PCM device).
202 This control is used to attenuate samples from left and right I2S ADC
203 inputs (on the LiveDrive). The result samples are forwarded to the front
209 This control is used to attenuate samples from left and right I2S ADC
210 inputs (on the LiveDrive). The result samples are forwarded to the ADC
211 capture FIFO (thus to the standard capture PCM device).
222 The closest value to pure signal is 20.
228 The closest value to pure signal is 20.
242 If this switch is on, then the sample for the center PCM is put to the
248 If this switch is on, then the sample for the center PCM is put to the
284 Don't forget that it's illegal to assign a channel to the same FX-bus accumulator 
346 …    US 6138207      Interpolation looping of audio samples in cache connected to    (Oct. 24, 2000)
354                         a common interrupt by associating programs to GP registers,