Lines Matching refs:samples

57 This control is used to attenuate samples for left and right PCM FX-bus
58 accumulators. ALSA uses accumulators 0 and 1 for left and right PCM samples.
59 The result samples are forwarded to the front DAC PCM slots of the AC97 codec.
63 This control is used to attenuate samples for left and right PCM FX-bus
64 accumulators. ALSA uses accumulators 0 and 1 for left and right PCM samples.
65 The result samples are forwarded to the rear I2S DACs. These DACs operates
70 This control is used to attenuate samples for left and right PCM FX-bus
71 accumulators. ALSA uses accumulators 0 and 1 for left and right PCM samples.
77 This control is used to attenuate samples for left and right PCM FX-bus
85 These controls are used to attenuate samples for left and right PCM FX-bus
92 This control is used to attenuate samples for left and right MIDI FX-bus
93 accumulators. ALSA uses accumulators 4 and 5 for left and right MIDI samples.
94 The result samples are forwarded to the front DAC PCM slots of the AC97 codec.
99 These controls are used to attenuate samples for left and right MIDI FX-bus
106 This control is used to attenuate samples for left and right rear PCM FX-bus
107 accumulators. ALSA uses accumulators 2 and 3 for left and right rear PCM samples.
108 The result samples are forwarded to the rear I2S DACs. These DACs operate
114 These controls are used to attenuate samples for left and right rear PCM FX-bus
115 accumulators. ALSA uses accumulators 2 and 3 for left and right rear PCM samples.
133 This control is used to attenuate samples for left and right front ADC PCM slots
134 of the AC97 codec. The result samples are forwarded to the front DAC PCM
143 This control is used to attenuate samples for left and right front ADC PCM slots
153 This control is used to attenuate samples from left and right IEC958 TTL
154 digital inputs (usually used by a CDROM drive). The result samples are
159 This control is used to attenuate samples from left and right IEC958 TTL
160 digital inputs (usually used by a CDROM drive). The result samples are
165 This control is used to attenuate samples from left and right zoom video
166 digital inputs (usually used by a CDROM drive). The result samples are
171 This control is used to attenuate samples from left and right zoom video
172 digital inputs (usually used by a CDROM drive). The result samples are
177 This control is used to attenuate samples from left and right IEC958 optical
178 digital input. The result samples are forwarded to the front DAC PCM slots
183 This control is used to attenuate samples from left and right IEC958 optical
184 digital inputs. The result samples are forwarded to the ADC capture FIFO
189 This control is used to attenuate samples from left and right IEC958 coaxial
190 digital inputs. The result samples are forwarded to the front DAC PCM slots
195 This control is used to attenuate samples from left and right IEC958 coaxial
196 digital inputs. The result samples are forwarded to the ADC capture FIFO
202 This control is used to attenuate samples from left and right I2S ADC
203 inputs (on the LiveDrive). The result samples are forwarded to the front
209 This control is used to attenuate samples from left and right I2S ADC
210 inputs (on the LiveDrive). The result samples are forwarded to the ADC
215 This control turns the tone control on or off. The samples for front, rear
221 When the tone control code is activated, the samples are always modified.
227 When the tone control code is activated, the samples are always modified.
232 If this switch is on, then the samples for the IEC958 (S/PDIF) digital
234 PCM samples are taken.
238 This control attenuates the samples for the headphone output.
340                         digital sound samples can be concurrently loaded
346 …    US 6138207      Interpolation looping of audio samples in cache connected to    (Oct. 24, 2000)