Lines Matching refs:control

57 This control is used to attenuate samples for left and right PCM FX-bus
63 This control is used to attenuate samples for left and right PCM FX-bus
70 This control is used to attenuate samples for left and right PCM FX-bus
77 This control is used to attenuate samples for left and right PCM FX-bus
92 This control is used to attenuate samples for left and right MIDI FX-bus
106 This control is used to attenuate samples for left and right rear PCM FX-bus
121 This control is used to attenuate sample for center PCM FX-bus accumulator.
127 This control is used to attenuate sample for center PCM FX-bus accumulator.
133 This control is used to attenuate samples for left and right front ADC PCM slots
137 *** Note: This control should be zero for the standard operations, otherwise ***
143 This control is used to attenuate samples for left and right front ADC PCM slots
147 *** Note: This control should be 100 (maximal value), otherwise no analog    ***
153 This control is used to attenuate samples from left and right IEC958 TTL
159 This control is used to attenuate samples from left and right IEC958 TTL
165 This control is used to attenuate samples from left and right zoom video
171 This control is used to attenuate samples from left and right zoom video
177 This control is used to attenuate samples from left and right IEC958 optical
183 This control is used to attenuate samples from left and right IEC958 optical
189 This control is used to attenuate samples from left and right IEC958 coaxial
195 This control is used to attenuate samples from left and right IEC958 coaxial
202 This control is used to attenuate samples from left and right I2S ADC
209 This control is used to attenuate samples from left and right I2S ADC
215 This control turns the tone control on or off. The samples for front, rear
220 This control sets the bass intensity. There is no neutral value!!
221 When the tone control code is activated, the samples are always modified.
226 This control sets the treble intensity. There is no neutral value!!
227 When the tone control code is activated, the samples are always modified.
238 This control attenuates the samples for the headphone output.
268 This control specifies the destination - FX-bus accumulators. There are
353 …    US 6195715      Interrupt control for multiple programs communicating with      (Feb. 27, 2001)