Lines Matching refs:to

7 The EMU10K2 chips have a DSP part which can be programmed to support 
24 (set to maximal or minimal value without checking of overflow).
29 DAC    - digital to analog converter
30 ADC    - analog to digital converter
37          Each of the synthesizer voices can feed its output to these accumulators
42 This control is used to attenuate samples for left and right front PCM FX-bus
44 samples for 5.1 playback. The result samples are forwarded to the front DAC PCM 
49 This control is used to attenuate samples for left and right surround PCM FX-bus
51 samples for 5.1 playback. The result samples are forwarded to the surround DAC PCM 
56 This control is used to attenuate samples for center PCM FX-bus accumulator.
58 is forwarded to the center DAC PCM slot of the Philips DAC.
62 This control is used to attenuate sample for LFE PCM FX-bus accumulator. 
64 is forwarded to the LFE DAC PCM slot of the Philips DAC.
68 This control is used to attenuate samples for left and right PCM FX-bus
70 stereo playback. The result samples are forwarded to the front DAC PCM slots 
75 This control is used to attenuate samples for left and right PCM FX-bus
77 The result is forwarded to the ADC capture FIFO (thus to the standard capture
82 This control is used to attenuate samples for left and right MIDI FX-bus
84 The result samples are forwarded to the front DAC PCM slots of the AC97 codec.
88 These controls are used to attenuate samples for left and right MIDI FX-bus
90 The result is forwarded to the ADC capture FIFO (thus to the standard capture
95 This control is used to attenuate samples for left and right Mic input.
96 For Mic input is used AC97 codec. The result samples are forwarded to 
97 the front DAC PCM slots of the Philips DAC. Samples are forwarded to Mic
102 This control is used to attenuate samples for left and right Mic input.
103 The result is forwarded to the ADC capture FIFO (thus to the standard capture
108 This control is used to attenuate samples from left and right IEC958 TTL
110 forwarded to the front DAC PCM slots of the Philips DAC.
114 This control is used to attenuate samples from left and right IEC958 TTL
116 forwarded to the ADC capture FIFO (thus to the standard capture PCM device).
120 This control is used to attenuate samples from left and right IEC958 optical
121 digital input. The result samples are forwarded to the front DAC PCM slots
126 This control is used to attenuate samples from left and right IEC958 optical
127 digital inputs. The result samples are forwarded to the ADC capture FIFO
128 (thus to the standard capture PCM device).
132 This control is used to attenuate samples from left and right I2S ADC
133 inputs (on the AudigyDrive). The result samples are forwarded to the front
138 This control is used to attenuate samples from left and right I2S ADC
139 inputs (on the AudigyDrive). The result samples are forwarded to the ADC
140 capture FIFO (thus to the standard capture PCM device).
144 This control is used to attenuate samples from left and right I2S ADC
145 inputs from Philips ADC. The result samples are forwarded to the front
151 This control is used to attenuate samples from left and right I2S ADC
152 inputs Philips ADC. The result samples are forwarded to the ADC
153 capture FIFO (thus to the standard capture PCM device).
157 This control is used to attenuate samples from left and right I2S ADC
158 inputs (on the AudigyDrive). The result samples are forwarded to the front
163 This control is used to attenuate samples from left and right I2S ADC
164 inputs (on the AudigyDrive). The result samples are forwarded to the ADC
165 capture FIFO (thus to the standard capture PCM device).
169 All stereo signals are mixed together and mirrored to surround, center and LFE.
170 This control is used to attenuate samples for left and right front speakers of
175 All stereo signals are mixed together and mirrored to surround, center and LFE.
176 This control is used to attenuate samples for left and right surround speakers of
181 All stereo signals are mixed together and mirrored to surround, center and LFE.
182 This control is used to attenuate sample for center speaker of this mix.
186 All stereo signals are mixed together and mirrored to surround, center and LFE.
187 This control is used to attenuate sample for LFE speaker of this mix.
198 The closest value to pure signal is 20.
204 The closest value to pure signal is 20.
208 This control is used to attenuate samples for front, surround, center and 
261 Don't forget that it's illegal to assign a channel to the same FX-bus accumulator 
335 …    US 6138207      Interpolation looping of audio samples in cache connected to    (Oct. 24, 2000)
343                         a common interrupt by associating programs to GP registers,