Lines Matching refs:front

42 This control is used to attenuate samples for left and right front PCM FX-bus
43 accumulators. ALSA uses accumulators 8 and 9 for left and right front PCM 
44 samples for 5.1 playback. The result samples are forwarded to the front DAC PCM 
70 stereo playback. The result samples are forwarded to the front DAC PCM slots 
84 The result samples are forwarded to the front DAC PCM slots of the AC97 codec.
97 the front DAC PCM slots of the Philips DAC. Samples are forwarded to Mic
110 forwarded to the front DAC PCM slots of the Philips DAC.
121 digital input. The result samples are forwarded to the front DAC PCM slots
133 inputs (on the AudigyDrive). The result samples are forwarded to the front
145 inputs from Philips ADC. The result samples are forwarded to the front
158 inputs (on the AudigyDrive). The result samples are forwarded to the front
170 This control is used to attenuate samples for left and right front speakers of
191 This control turns the tone control on or off. The samples for front, rear
208 This control is used to attenuate samples for front, surround, center and 
214 output are taken only from the raw FX8010 PCM, otherwise standard front