Lines Matching refs:default
159 clockfreq - Clock frequency for AD1816A chip (default = 0, 33000Hz)
224 0 = disabled (default), 1 = auto-detect
245 ac97_clock - AC'97 clock (default = 48000)
254 spdif_aclink - S/PDIF transfer over AC-link (default = 1)
272 Note: The default index value of this module is -2, i.e. the first
288 255 = Autodetect what is required (default)
313 dma2 - DMA # for WSS capture (0,1), -1 = disabled (default)
314 mpu_port - port # for MPU-401 UART (0x300,0x330), -1 = disabled (default)
315 mpu_irq - IRQ # for MPU-401 UART (3,5,7,9), -1 = disabled (default)
316 fm_port - port # for OPL3 (0x388), -1 = disabled (default)
347 dma2 - DMA # for WSS capture (0,1), -1 = disabled (default)
348 mpu_port - port # for MPU-401 UART (0x300,0x330), -1 = disabled (default)
349 mpu_irq - IRQ # for MPU-401 UART (5,7,9,10), -1 = disabled (default)
350 fm_port - port # for OPL3 (0x388), -1 = disabled (default)
392 joystick - Enable joystick (default off)
401 digital_rate - Override the default digital rate (Hz)
406 Note: The default index value of this module is -2, i.e. the first
422 isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
448 0 = disable (default)
451 1 = integrated PCI port (default on 8738),
454 (default = 1)
485 isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
512 dual_codec - Secondary codec ID (0 = disable, default)
526 mmap_valid - Support OSS mmap mode (default = 0).
561 reference_rate - reference sample rate, 44100 or 48000 (default)
562 multiple - multiple to ref. sample rate, 1 or 2 (default)
564 consists of SSVID << 16 | SSDID. The default is
604 (default = 1, up to 4)
606 (default = 8, up to 128)
607 hrtimer - Use hrtimer (=1, default) or system timer (=0)
608 fake_buffer - Fake buffer allocations (default = 1)
617 As default, snd-dummy drivers doesn't allocate the real buffers
644 seq_ports - allocated sequencer ports (4 by default)
645 max_synth_voices - limit of voices used for wavetable (64 by default)
682 joystick - Enable joystick (default off)
697 0 = disable (default), 1 = auto-detect
708 isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
709 mpu_port - port # for MPU-401 port (0x300,0x310,0x320,0x330), -1 = disable (default)
711 fm_port - port # for OPL3 (option; share the same port as default)
726 isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
731 mpu_port - port # for MPU-401 port (0x300,0x310,0x320,0x330), -1 = disable (default)
758 pcm_substreams_p - playback channels (1-8, default=2)
759 pcm_substreams_c - capture channels (1-8, default=0)
762 2 = auto (default))
763 enable_mpu - enable MPU401 (0 = off, 1 = on, 2 = auto (default))
764 joystick - enable joystick (default off)
864 -1 = system default: choose appropriate one per controller
871 probe_mask - Bitmask to probe codecs (default = -1, meaning all slots)
875 probe_only - Only probing and no codec initialization (default=off);
884 beep_mode - Selects the beep registration mode (0=off, 1=on); default
890 enable_msi - Enable Message Signaled Interrupt (MSI) (default = off)
894 (default = on)
899 (default = on)
900 snoop - Enable/disable snooping (default = on)
908 If your machine isn't listed there, the default (usually minimal)
918 If the default configuration doesn't work and one of the above
989 line_outs_monitor - Send playback streams to analog outs by default.
990 enable_monitor - Enable Analog Out on Channel 63/64 by default.
1025 in msec resolution, default value is 500 (0.5 sec)
1125 motherboards (default yes on nForce chips,
1129 (default off)
1132 (0 = off, 1 = on, -1 = default)
1161 Note: The default index value of this module is -2, i.e. the first
1173 midi - 1 = MIDI UART enable, 0 = MIDI UART disable (default)
1174 pcm_voices - reserved PCM voices for the synthesizer (default 2)
1175 effect - 1 = InterWave effects enable (default 0);
1177 isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
1196 midi - 1 = MIDI UART enable, 0 = MIDI UART disable (default)
1197 pcm_voices - reserved PCM voices for the synthesizer (default 2)
1198 effect - 1 = InterWave effects enable (default 0);
1200 isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
1269 external_amp - enable external amp (enabled by default)
1271 -1 for default pin (8 for allegro, 1 for
1339 pnp - PnP detection - 0 = disable, 1 = enable (default)
1353 write_ndelay - enable write ndelay (default = 1)
1354 calibrate_signal - calibrate signal (default = 0)
1355 isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
1356 digital - Digital daughterboard present (default = 0)
1357 cfg - Config port (0x250, 0x260 or 0x270) default = PnP
1384 write_ndelay - enable write ndelay (default = 1)
1385 calibrate_signal - calibrate signal (default = 0)
1386 isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
1397 port - I/O port # for MTPAV (0x378,0x278, default=0x378)
1398 irq - IRQ # for MTPAV (7,5, default=7)
1399 hwports - number of supported hardware ports, default=8.
1418 force_ac97 - 0 or 1 (disabled by default)
1420 use_cache - 0 or 1 (disabled by default)
1457 turned on as default. This option is worth to try if the
1473 isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
1497 isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
1515 isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
1534 isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
1598 enable_beep - enable beep using PCM (enabled as default)
1620 joystick_port - Joystick port # (default: 0x200)
1621 mpu_port - MPU401 port # (default: 0x330)
1622 opl3_port - OPL3 port # (default: 0x388)
1650 (default = 0)
1693 mic_agc - Mic Auto-Gain-Control - 0 = disable, 1 = enable (default)
1694 csp - ASP/CSP chip support - 0 = disable (default), 1 = enable
1695 isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
1728 joystick - Enable gameport - 0 = disable (default), 1 = enable
1745 joystick - Enable gameport - 0 = disable (default), 1 = enable
1779 isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
1794 wf_raw - Assume that we need to boot the OS (default:no)
1797 fx_raw - Assume that the FX process needs help (default:yes)
1799 when the driver is loaded. The default is to download the
1801 "default" operation, whatever that means.
1804 (default:150)
1815 (default: 100)
1817 (default: 50)
1819 (default:wavefront.os)
1825 (default:2)
1827 (default:20)
1829 (default:10)
1845 reverb - Reverb Enable - 1 = enable, 0 = disable (default)
1847 mge - Mic Gain Enable - 1 = enable, 0 = disable (default)
1859 38400 = default
1861 115200 = default
1863 1 = default
1907 nrpacks - Max. number of packets per URB (default: 8)
1912 interface (default: no)
1952 joystick - Enable joystick (default off) [VIA686A/686B only]
1953 ac97_clock - AC'97 codec clock base (default 48000Hz)
1955 0 = auto (default), 1 = enable, 2 = disable,
1968 default value 1.4. Then the interrupt number will be
1976 As default (dxs_support = 0), 48k fixed rate is chosen
1988 work and the default setting is ok, dxs_support=3 is the
1989 right choice. If the default setting doesn't work at all,
2005 ac97_clock - AC'97 codec clock base (default 48000Hz)
2009 Note: The default index value of this module is -2, i.e. the first
2021 midi_devs - MIDI devices # (1-4, default=4)
2040 ibl - Capture IBL size. (default = 0, minimum size)
2057 The size is usually aligned to 126. As default (=0), the smallest
2068 ibl - Capture IBL size. (default = 0, minimum size)
2096 mpu_port - 0x300,0x330,0x332,0x334, 0 (disable) by default,
2098 fm_port - 0x388,0x398,0x3a0,0x3a8, 0 (disable) by default
2100 joystick_port - 0x201,0x202,0x204,0x205, 0 (disable) by default,
2130 - default Don't override the default setting
2179 option "cards_limit" of snd module. As default it's set to 1.