Lines Matching refs:board

26 The RocketPort ISA board requires I/O ports to be configured by the DIP
27 switches on the board.  See the section "ISA Rocketport Boards" below for
32 board1 :	I/O port for the first ISA board
33 board2 :	I/O port for the second ISA board
34 board3 :	I/O port for the third ISA board
35 board4 :	I/O port for the fourth ISA board
43 board.
89 switches on the Rocketport board.
111 must have a unique board ID set on the dip switches.  The first
112 Rocketport board must be set with the DIP switches corresponding to
113 the first board, the second board must be set with the DIP switches
114 corresponding to the second board, etc.  IMPORTANT: The board ID is
128 CAN NOT set the second, third or fourth board for address 0x140 since
129 the first 4 bytes of that range are used by the first board.  You would
130 need to set the second, third, or fourth board to one of the next available
171 kernel, and type of board you are using. Error messages and log