Lines Matching refs:number
40 number (bits 5 and 6). The number of modes can be changed by changing
65 limits). Both the auto-rewind (minor equals device number) and
66 non-rewind devices (minor is 128 + device number) are implemented.
124 remaining bits define the tape device number. This numbering is
125 backward compatible with the numbering used when the minor number was
134 is the tape number and y a character corresponding to the mode (none, l, m,
173 - the number of pages in the transfer exceeds the number of
222 allocated so that as many segments as possible are used but the number
225 max_sg_segs) and the number of segments used in phases 1 and 2
227 number of scatter/gather segments allowed for the SCSI adapter is not
228 exceeded if it is smaller than the maximum number of scatter/gather
229 segments specified. If the maximum number allowed for the SCSI adapter
230 is smaller than the number of segments used in phases 1 and 2,
237 is finished and the number of bytes is returned. The next write
239 the next write is allowed to proceed and, if successful, the number of
240 bytes is returned. After this, -1 and the number of bytes are
247 The buffer size, write threshold, and the maximum number of allocated buffers
253 max_sg_segs=xxx the maximum number of scatter/gather
267 with 'st.'. For instance, to set the maximum number of scatter/gather
269 number of scatter/gather segments).
287 dd is the maximum number of scatter/gather segments
334 MT_ST_HPLOADER_OFFSET + 6, the number x is used sent to the
383 MT_ST_SCSI2LOGICAL the logical block number is used in
422 non-zero number, and this number is not 0xff, the number is
443 given the number of the sense data byte (the lowest eight
463 The file number and block number within file are returned. The
466 The number of recovered errors since the previous status call
481 The maximum number of tape devices is determined by the define
493 filemarks. With this method the file number in the status is
496 number will be invalid.