Lines Matching refs:drives
26 QIC-drives). The result is that any tape can be read, writing can be
115 The tape driver currently supports up to 2^17 drives if 4 modes for
205 this read command. Should be disabled for those drives that don't like
325 for SCSI-1 drives and SCSI-2 seek for SCSI-2 drives. The file and
338 SCSI mode page 15. Note that some drives other methods for
339 control of compression. Some drives (like the Exabytes) use
340 density codes for compression control. Some drives use another
342 driver. Some drives without compression capability will accept
384 the MTSEEK and MTIOCPOS for SCSI-2 drives instead of
440 is found from the extended sense data. Many drives set one or
458 Tandberg-compatible QFA for SCSI-1 drives and the SCSI-2
459 command for the SCSI-2 drives.
488 finished. The drives and SCSI adapters should handle this condition