Lines Matching refs:feature

215 registers for bit 32-63. Another interesting feature is that LOAD/STORE 
229 some poorly designed motherboards may break this feature.
239 characteristics. This feature may also reduce average command latency.
240 In order to really gain advantage of this feature, devices must have 
254 If your controller has NVRAM, you can configure this feature per target 
257 to enable or disable this feature.
272 BIOS/SETUP, you can configure tagged queueing feature and device queue 
320 feature is disabled by default and requires a compilation configuration 
561 if only one has a flaw for some SCSI feature, you can disable the
562 support by the driver of this feature at linux start-up and enable
563 this feature after boot-up only for devices that support it safely.
587     Some SCSI-2 devices do not report this feature in byte 7 of inquiry 
847         iarb:0    do not use this feature.
848         iarb:#x   use this feature according to bit fields as follow:
1016 When this feature has been enabled for the current connection, the chip has 
1022 BUS, using this feature can be extremely unfair. So, you are not advised
1023 to enable it, or at most enable this feature for the case the chip lost 
1026 This feature has the following advantages:
1215 However, for people like me who want to enable this feature, I have added 
1268 Try to enable one feature at a time with control commands.  For example:
1280 Once you have found the device and the feature that cause problems, just 
1281 disable that feature for that device.
1809 perform byte reordering each time it is needed. This feature has been 
1821 Driver version 2.5 is also, in theory, ready for this feature.