Lines Matching refs:Symbios
78 17.2 Symbios NVRAM layout
189 Serial NVRAM: Symbios and Tekram formats
256 maximum number of queued commands up to 32. The Symbios Setup only allows
608 Enable support for reading the serial NVRAM data on Symbios and
609 some Symbios compatible cards, and Tekram DC390W/U/F cards. Useful for
610 systems with more than one Symbios compatible controller where at least
611 one has a serial NVRAM, or for a system with a mixture of Symbios and
614 Also enables Symbios and Tekram cards to be distinguished so
616 mixture of Symbios and Tekram cards so the Symbios cards can make use of
617 the full range of Symbios features, differential, led pin, without
952 Tekram format Symbios format
1455 on Symbios and some Symbios compatible host adaptors, and Tekram boards. The
1456 serial NVRAM is used by Symbios and Tekram to hold set up parameters for the
1459 The Symbios NVRAM also holds data on the boot order of host adaptors in a
1469 Tekram boards using Symbios chips, DC390W/F/U, which have NVRAM are detected
1470 and this is used to distinguish between Symbios compatible and Tekram host
1471 adaptors. This is used to disable the Symbios compatible "diff" setting
1473 configuration parameter is set enabling both Symbios and Tekram boards to be
1474 used together with the Symbios cards using all their features, including
1475 "diff" support. ("led pin" support for Symbios compatible cards can remain
1480 17.2 Symbios NVRAM layout
1592 (Removable Media added Symbios BIOS version 4.09)