Lines Matching refs:that
5 - Backport from SYM-2 the work-around that allows to support
6 hardwares that fail PCI parity checking.
7 - Check that we received at least 8 bytes of INQUIRY response
8 for byte 7, that contains device capabilities, to be valid.
16 for chips that support SRUN bit in ISTAT1 and if SCRIPTS are
18 - In the CCB abort path, do not assume that the CCB is currently
43 The bus_dvma_to_mem() interface that reverses the actual
47 - Merge changes for linux-2.4 that declare the host template
50 - Increase SCSI message size up to 12 bytes, given that 8
62 from SCRIPTS that requires special alignments.
70 This parameter wasn't that clever since we can use "sync:"
73 - Add FE_VARCLK feature bit that indicates that SCSI clock
79 - Remove FE_CLK80 feature bit that got useless.
96 that implement a weak memory ordering.
106 Remove unused options that claimed to optimize for the 896.
130 - Tiny change for __sparc__ appeared in 2.3.99-pre4.1 that
133 that supply SCSI_DATA_NONE direction (this avoids some BUG()
142 that have been useful guidelines.
144 (Scsi_Cmnd) with kernels that provide this information.
170 that have been useful guidelines, for having reviewed the
172 - 2 tiny bugs fixed in the PCI wrapper that provides support
175 (Scsi_Cmnd) with kernels that provide this information.
176 - Fix an old bug that only affected 896 rev. 1 when driver
203 - Some fix for Sparc from DSM that went directly to kernel tree.
208 through the /proc FS (rather cosmetic changes that consist in
215 - Add NVRAM support for Tekram boards that use 24C16 EEPROM.
217 been that one that got this feature first.
226 - Fix in a tiny 'printk' bug that may oops in case of extended
238 that overclocked PCI BUS up to 48 MHz will not be refused.
240 guarantee that its measure of the SCSI clock is correct.
254 - Remove the quirk handling that has been useless since day one.
285 (A problem has been reported on PPC with that code).
292 This ensures that the driver will be able to grab the sense data
293 from a device that has received a BUS DEVICE RESET message from
297 - Add the control command 'cleardev' that allows to send a ABORT
306 when the driver is told to abort a command that is disconnected and
310 - Add the control command 'resetdev' that allows to send a BUS
394 - Fix some oooold bug that hangs the bus if a device rejects a
397 - Still some typo that made compilation fail for 64 bit (trivial fix).
411 kinds of screw-up that may happen on the SCSI BUS.
437 I asked SYMBIOS about and got in reply the explanations that are
481 - The PCI memory read from SCRIPTS that should ensure ordering
491 When set, the driver unconditionnaly assumes that the interrupt
495 With a 896 that handles MA from SCRIPTS, this can be a great win,
497 only PCI write transactions that may be posted.
499 Even with this penalty, I think that this will work great.
502 - Still a buglet in the tags initial settings that needed to be fixed.
504 that claim TGQ support. The driver used at least 2 for the queue
511 - Ignore chips that are driven by SISL RAID (DAC 960).
532 Remove all platform dependent fix-ups that was not needed or
543 - Do not set PFEN when it is useless. Doing so we are sure that BOF
558 - Implement a work-around (DEL 472 - ITEM 5) that should allow the