Lines Matching refs:c
32 * scsi.c (scsi_proc_info): /proc/scsi/scsi now also lists all
35 * scsi_proc.c (proc_print_scsidevice): Added. Used by scsi.c and
36 eata_dma_proc.c to produce some device info for /proc/scsi.
38 * eata_dma.c (eata_queue)(eata_int_handler)(eata_scsi_done):
46 * eata_dma.c (eata_queue)(eata_int_handler): Added code to do
51 * eata_pio.c: Use HZ constant for time references.
53 * aic7xxx.c, aic7xxx.h, aic7xxx_asm.c: Changed copyright from BSD
62 * scsi_proc.c (dispatch_scsi_info): Removed unused variable.
68 * scsi.c Blacklist concept expanded to 'support' more device
72 * scsi_debug.c (scsi_debug_proc_info): Added support to control
80 * scsi_proc.c: Fixed a number of bugs in directory handling
89 * scsi.c/h, hosts.c/h et al reindented to increase readability
92 * scsi.c, scsi_proc.c, ../../fs/proc/inode.c: Added
95 * scsi.c (scsi_proc_info): Added, to support /proc/scsi/scsi.
102 * proc.c: Renamed to scsi_proc.c
110 * scsi.c: Added native multichannel and wide scsi support.
112 * proc.c (dispatch_scsi_info) (build_proc_dir_hba_entries):
117 * sd.c (requeue_sd_request): Zero out the scatterlist only if
120 * eata_dma.c (register_HBA) (eata_queue): Add support for
123 * hosts.c: Make use_clustering changeable in the Scsi_Host structure.
129 * buslogic.c: Update to version 1.15 (From Leonard N. Zubkoff).
134 * eata_dma.c: Update to 2.3.5r. Modularize. Improved error handling
141 * scsi.c: If we get a FMK, EOM, or ILI when attempting to scan
148 * sd.c: Use restore_flags in do_sd_request - this may result in
153 * st.c: Use bytes, not STP->buffer->buffer_size when reading
161 * st.c: Fix typo - restoring wrong flags.
167 * st.c: Perform some waiting operations with interrupts off.
174 * aha152x.c: Modularize. Add support for PCMCIA.
176 * eata.c: Update to version 2.0. Fixed bug preventing media
179 * scsi.c: Detect as NEC (for photo-cd purposes) for the 84
184 * sr.c: Add handling for NEC_OLDCDR. Treat as unknown.
186 * u14-34f.c: Update to version 2.0. Fixed same bug as in
187 eata.c.
201 * qlogic.c: Update to version 0.41.
203 * seagate.c: Change some message to be more descriptive about what
206 * sr.c: spelling/whitespace changes.
218 * 53c7,8xx.c: crash on AEN fixed, SCSI reset is no longer a NOP,
224 * hosts.c, hosts.h, scsi_ioctl.c, sd.c, sd_ioctl.c, sg.c, sr.c,
225 sr_ioctl.c: Add special junk at end that Emacs will use for
228 * qlogic.c: Update to v0.40a. Improve parity handling.
230 * scsi.c: Add Hitachi DK312C to blacklist. Change "};" to "}" in
235 * sd.c: Use sti instead of restore flags - causes latency problems.
237 * seagate.c: Use controller_type to determine string used when
240 * sr.c: More photo-cd hacks to make sure we get the xa stuff right.
241 * sr.h, sr.c: Change is_xa to xa_flags field.
243 * st.c: Disable retries for write operations.
249 * eata.c: Update to 1.17.
251 * eata_dma.c: Update to 2.31a. Add more support for /proc/scsi.
256 * hosts.c: If we remove last host registered, reuse host number.
260 * scsi.c (scan_scsis): memset(SDpnt, 0) and set SCmd.device to SDpnt.
264 * sr_ioctl.c: Increase IOCTL_TIMEOUT to 3000.
266 * st.c: Allow for ST_EXTRA_DEVS in st data structures.
268 * u14-34f.c: Update to 1.17.
274 * eata.c: Update to 1.16. Use wish_block instead of host->block.
276 * hosts.c: Initialize wish_block to 0.
280 * scsi.c: Use wish_block as indicator that the host should be added
283 * sg.c: Add SG_EXTRA_DEVS to number of slots.
285 * u14-34f.c: Use wish_block.
291 * eata.c: Change naming from eata_* to eata2x_*. Now at vers 1.15.
296 * hosts.c: Do not reuse host numbers.
302 * scsi.c (scsi_make_blocked_list): New function - code copied from
303 hosts.c.
305 * scsi.c: Update code to disable photo CD for Toshiba cdroms.
308 * sr.c: Fix setting density for Toshiba drives.
310 * u14-34f.c: Clear target_time_out array during reset.
316 * Makefile, u14-34f.c: Modularize.
318 * Makefile, eata.c: Modularize. Now version 1.14
320 * NCR5380.c: Update interrupt handler with new arglist. Minor
323 * eata_dma.c: Begin to modularize. Add hooks for /proc/scsi.
330 * hosts.c: Initialize ->dma_channel and ->io_port when registering
333 * qlogic.c: Modularize and add PCMCIA support.
335 * scsi.c: Add Hitachi to blacklist.
337 * scsi.c: Change default to no lun scan (too many problem devices).
341 * sd.c: Do not check for non-existent partition until after
344 * sg.c: Undo previous change which was wrong.
346 * sr_ioctl.c: Increase IOCTL_TIMEOUT to 2000.
348 * st.c: Patches from Kai - improve filemark handling.
356 * scsi.c: Make sure that all buffers are 16 byte aligned - some
359 * scsi.c (scan_scsis): Remove message printed.
361 * scsi.c (scsi_init): Move message here.
367 * sr.c: Photo-cd related changes. (Gerd Knorr??).
369 * st.c: Changes from Kai related to EOM detection.
381 * scsi.c: Test for Toshiba XM-3401TA and exclude from detection
384 * sr.c: Update photocd code.
390 * st.c, st_ioctl.c, sg.c, sd_ioctl.c, scsi_ioctl.c, hosts.c:
393 * qlogic.c, buslogic.c, aha1542.c: Include linux/module.h.
401 * aha152x.c: Update to version 1.8 from Juergen.
403 * eata_dma.c: Update from Michael Neuffer.
407 * in2000.c: Fix biosparam to support large disks.
409 * qlogic.c: Minor changes (change sti -> restore_flags).
415 * aha1542.c(aha1542_intr_handle): Use arguments handed down to find
418 * buslogic.c: Likewise.
420 * eata_dma.c: Use min of 2 cmd_per_lun for OCS_enabled boards.
422 * scsi.c: Make RECOVERED_ERROR a SUGGEST_IS_OK.
424 * sd.c: Fail if we are opening a non-existent partition.
426 * sr.c: Bump SR_TIMEOUT to 15000.
430 * sr_ioctl.c: Remove CDROMMULTISESSION_SYS ioctl.
432 * ultrastor.c: Fix bug in call to ultrastor_interrupt (wrong #args).
444 * aha1542.c, buslogic.c: Clean up interrupt handler a little now
447 * aha274x.c: s/snarf_region/request_region/
449 * eata.c: Update to version 1.12. Fix some comments and display a
452 * u14-34f.c: Update to version 1.13. Fix some comments and display a
455 * eata_dma.c: Define get_board_data function (send INQUIRY command).
459 * fdomain.c: Update to version 5.26. Improve detection of some boards
462 * scsi.c (scsi_register_host): Change "name" to const char *.
464 * sr.c: Fix problem in set mode command for Toshiba drives.
466 * sr.c: Fix typo from patch 81.
478 * hosts.c, Makefile: Add eata_dma.
492 * hosts.c: Change next_host to next_scsi_host, and make global.
501 * scsi.c: Fix scan_scsis so that it can be run by a user process.
505 * scsi.c(scan_scsis): Do not use stack variables for I/O - this
509 * scsi.c: Change dma freelist to be a set of pages. This allows
513 * scsi_module.c: Fix include.
515 * sd.c: Declare detach function. Increment/decrement module usage
520 * sr.c: Likewise.
522 * sg.c: Declare detach function. Allow attachment of devices on
525 * st.c: Declare detach function. Increment/decrement module usage
534 * sr.c: Attacked by spelling bee...
538 * sr.c: make printk messages for photoCD a little more informative.
540 * sr_ioctl.c: Fix CDROMMULTISESSION_SYS ioctl.
550 * in2000.c: Bugfix - apparently this is the fix that we have
559 * 53c7,8xx.c: Fix from Linus - emulate splx.
565 * scsi_module.c: New file. Contains support for low-level loadable
568 * sd.c: More s/int/long/ changes.
570 * seagate.c: Explicitly include linux/config.h
572 * sg.c: Increment/decrement module usage count on open/close.
574 * sg.c: Be a bit more careful about the user not supplying enough
578 * sr.c: More changes for Photo-CD. This apparently breaks NEC drives.
580 * sr_ioctl.c: Support CDROMMULTISESSION ioctl.
587 * constants.c: Add type cast in switch statement.
589 * scsi.c (scsi_free): Change datatype of "offset" to long.
597 * aha1542.c:
598 * aha1740.c:
599 * buslogic.c:
600 * in2000.c:
601 * scsi.c:
602 * scsi_debug.c:
603 * sd.c:
604 * sr.c:
605 * st.c:
611 * buslogic.c: Spelling fix.
613 * scsi.c: Add HP C1790A and C2500A scanjet to blacklist.
615 * scsi.c: Spelling fixup.
617 * sd.c: Add support for sd_hardsizes (hard sector sizes).
619 * ultrastor.c: Use save_flags/restore_flags instead of cli/sti.
627 * eata.c: New version from Dario - version 1.11.
631 * hosts.c: Add support for blocking. Linked list automatically
634 * scsi.c: Add sankyo & HP scanjet to blacklist. Add support for
637 * scsi.c: Recognize scanners and processors in scan_scsis.
641 * st.c: New version from Kai - add better support for backspace.
643 * u14-34f.c: New version from Dario. Supports blocking.
649 * buslogic.c: Update from Dave Gentzel. Version 1.14.
653 * fdomain.c: New version from Rik Faith - version 5.22. Add support
656 * hosts.c: Spelling.
658 * qlogic.c: Update to version 0.38a. Add more support for PCMCIA.
660 * scsi.c: Mask device type with 0x1f during scan_scsis.
665 * scsi.c: Bugfix - pass pid, not SCpnt as second arg to
668 * scsi.c: Restore interrupt state to previous value instead of using
671 * scsi.c: Add a bunch of module stuff (all commented out for now).
673 * scsi.c: Clean up scsi_dump_status.
679 * sg.c: Bugfix - always use sg_free, since we might have big buff.
685 * sg.c: Clear buff field when not in use. Only call scsi_free if
691 * scsi.c (scsi_times_out): Pass pid down so that we can protect
694 * scsi.c (scsi_abort): Zero timeout field if we get the
698 * scsi.c (scsi_done): Restore cmd_len, use_sg here.
700 * scsi.c (request_sense): Not here.
705 * hosts.c (scsi_mem_init): Mark pages as reserved if they fall in
710 * buslogic.c: Set forbidden_addr stuff if using a buggy board.
712 * aha1740.c: Test for NULL pointer in SCtmp. This should not
715 * 53c7,8xx.c: Add new PCI chip ID for 815.
721 * ChangeLog, st.c: Spelling.
729 * u14-34f.c: Use block field in Scsi_Host to prevent commands from
735 * eata.c: Likewise.
737 * st.c: More changes from Kai. Add ready flag to indicate drive
742 * sr.c: Bugfix (do not subtract CD_BLOCK_OFFSET) for photo-cd
745 * sg.c: Bugfix - fix problem where opcode is not correctly set up.
747 * seagate.[c,h]: Use #defines to set driver name.
749 * scsi_ioctl.c: Zero buffer before executing command.
751 * scsi.c: Use new cmd_per_lun field in Scsi_Hosts as appropriate.
756 * hosts.c: Initialize cmd_per_lun in Scsi_Hosts from template.
758 * buslogic.c: Use cmd_per_lun field - initialize to different
762 * aha1542.c: Spelling.
783 * aha152x.[c,h]: Remove redundant info() function.
785 * aha1542.[c,h]: Likewise.
787 * aha1740.[c,h]: Likewise.
789 * aha274x.[c,h]: Likewise.
791 * eata.[c,h]: Likewise.
793 * pas16.[c,h]: Likewise.
795 * scsi_debug.[c,h]: Likewise.
797 * t128.[c,h]: Likewise.
799 * u14-34f.[c,h]: Likewise.
801 * ultrastor.[c,h]: Likewise.
803 * wd7000.[c,h]: Likewise.
805 * aha1542.c: Add support for command line options with lilo to set
808 * buslogic.[c,h]: New version (1.13) from Dave Gentzel.
818 * hosts.c: Initialize block field.
820 * in2000.c: Remove "static" declarations from exported functions.
824 * scsi.c: Correctly set cmd_len field as required. Save and
829 * scsi.c: When incrementing usage count, walk block linked list
835 * scsi_ioctl.c: If we have an info() function, call it, otherwise
838 * sd.c, sr.c: Clear cmd_len field prior to each command we
843 * sg.[c,h]: Add support for vendor specific 12 byte commands (i.e.
846 * sr.c: Bugfix from Gerd in photocd code.
848 * sr.c: Bugfix in get_sectorsize - always use scsi_malloc buffer -
855 * sr.c: Change spelling of manufactor to manufacturer.
859 * scsi.c: Likewise.
861 * qlogic.c: Spelling corrections.
865 * in2000.c: Update from Bill Earnest, change from
874 * u14-34f.c: Spelling corrections.
876 * sr.[h,c]: Add support for multi-session CDs from Gerd Knorr.
881 * scsi.c: More spelling corrections.
883 * qlogic.h, qlogic.c, README.qlogic: New driver from Tom Zerucha.
885 * in2000.c, in2000.h: New driver from Brad McLean/Bill Earnest.
887 * fdomain.c: Spelling correction.
889 * eata.c: Spelling correction.
897 * eata.c: Set sg_tablesize correctly for DPT PM2012 boards.
913 * u14-34f.c: Use Scsi_Host can_queue variable instead of one from template.
915 * eata.[c,h]: New driver for DPT boards from Dario Ballabio.
917 * buslogic.c: Use can_queue field.
923 * sd.c: Give I/O error if we attempt 512 byte I/O to a disk with
926 * scsicam.c: Make sure we do read from whole disk (mask off
929 * scsi.c: Use can_queue in Scsi_Host structure.
932 * hosts.c: Initialize can_queue from template.
936 * aha1740.c: Print out warning about NULL ecbptr.
942 * fdomain.c: Update to version 5.20. (From Rik Faith). Support
947 * st.c: Patches from Kai Makisara - support additional densities,
952 * scsi.c: Add Mediavision CDR-H93MV to blacklist.
958 * u14-34f.[c,h]: New driver from Dario Ballabio.
960 * aic7770.c, aha274x_seq.h, aha274x.seq, aha274x.h, aha274x.c,
970 * buslogic.c: Set BUSLOGIC_CMDLUN back to 1 [Eric].
972 * ultrastor.c: Fix asm directives for new GCC.
974 * sr.c, sd.c: Use new end_scsi_request function.
983 * scsi.c: Do not allocate dma bounce buffers if we have exactly
990 * aha152x.c: Add support for disabling the parity check. Update
993 * seagate.c: Tweak debugging message.
999 * aha152x.c: Add eb800 for Vtech Platinum SMP boards. [Juergen].
1001 * scsi.c: Add Quantum PD1225S to blacklist.
1007 * sd.c: Fix bug when we were deleting the wrong entry if we
1010 * sr.c: Another spelling patch.
1018 * sr.c: Print correct device number.
1024 * NCR5380.c: Add support for LIMIT_TRANSFERSIZE.
1028 * pas16.c: Some more minor tweaks. Test for Mediavision board.
1031 * sr.c: Set SCpnt->transfersize.
1039 * buslogic.c: Add a few more fixups from Dave. Disk translation
1042 * pas16.c: Add a few patches (Drew?).
1049 * hosts.c: Add type casts for scsi_init_malloc.
1051 * scsicam.c: Add type cast.
1059 * aha152x.c, NCR53*.c, fdomain.c, g_NCR5380.c, pas16.c, seagate.c,
1060 t128.c: Use request_irq, not irqaction. [??]
1062 * aha1542.c: Move test for shost before we start to use shost.
1064 * aha1542.c, aha1740.c, ultrastor.c, wd7000.c: Use new
1067 * buslogic.c: Update from Dave Gentzel.
1073 * NCR5380.c: Change NCR5380_print_status to static.
1075 * seagate.c: A few more bugfixes. Only Drew knows what they are
1078 * ultrastor.c: Tweak some __asm__ directives so that it works
1085 * NCR5380.c: Return SCSI_RESET_WAKEUP from reset function.
1087 * aha1542.c: Reset mailbox status after a bus device reset.
1089 * constants.c: Fix typo (;;).
1091 * g_NCR5380.c:
1092 * pas16.c: Correct usage of NCR5380_init.
1094 * scsi.c: Remove redundant (and unused variables).
1096 * sd.c: Use memset to clear all of rscsi_disks before we use it.
1098 * sg.c: Ditto, except for scsi_generics.
1100 * sr.c: Ditto, except for scsi_CDs.
1102 * st.c: Initialize STp->device.
1104 * seagate.c: Fix bug. [Drew]
1112 * st.c: Print correct number for device.
1120 * 53c7,8xx.c: New file from Drew. PCI driver.
1128 * scsicam.c: New file from Drew. Read block 0 on the disk and
1130 the partition table if possible. Only used by 53c[7,8]xx right
1134 * sd.c: Use device letters instead of sd%d in a lot of messages.
1136 * seagate.c: Fix bug that resulted in lockups with some devices.
1138 * sr.c (sr_open): Return -EROFS, not -EACCES if we attempt to open
1141 * hosts.c, Makefile: Update for new driver.
1143 * NCR5380.c, NCR5380.h, g_NCR5380.h: Update from Drew to support
1146 * constants.c: Define CONST_CMND and CONST_MSG. Other minor
1149 * fdomain.c, fdomain.h: New version from Rik Faith. Update to
1152 * pas16.c: Update with new irq initialization.
1154 * t128.c: Update with minor cleanups.
1156 * scsi.c (scsi_pid): New variable - gives each command a unique
1171 * aha1542.c: Always call aha1542_mbenable, use new udelay
1175 * g_NCR5380.c: Remove #include <linux/config.h> and #if
1178 * seagate.c: Likewise.
1183 hosts.c: Create a linked list of detected high level devices.
1192 scsi.c: (scan_scsis): Use linked list instead of knowledge about
1201 sd.c, sr.c, sg.c, st.c: Adjust init/attach functions to use new
1208 * ultrastor.c: Change constraint on asm() operand so that it works
1215 * sr.c(sr_open): Do not allow opens with write access.
1221 * sd.c: Increase SD_TIMEOUT from 300 to 600.
1223 * sr.c: Remove stray task_struct* variable that was no longer
1226 * sr_ioctl.c: Fix typo in up() call.
1232 * scsi.c (scan_scsis): Fix detection of some Toshiba CDROM drives
1242 * scsi.c (scan_scsis): Add new devices to end of linked list, not
1260 * scsi.c, scsi.h (allocate_device, request_queueable): Change
1271 * scsi.c (scsi_init_malloc, scsi_free_malloc): New functions -
1276 * scsi.h, st.c, sr.c, sd.c, sg.c: Change *_init1 functions to use
1282 * scsi.c (scsi_dev_init): Set up for scsi_init_malloc.
1287 * scsi.c (scan_scsis): Change to only scan one host.
1290 * hosts.c (scsi_init_free): Change so that number of extra bytes
1297 * hosts.c: Rename scsi_hosts to builtin_scsi_hosts, create linked
1304 * aha152x.c: Changes from Juergen - cleanups and updates.
1306 * sd.c, sr.c: Use new check_media_change and revalidate
1309 * st.c, st.h: Add changes from Kai Makisara, dated Jun 22.
1316 * sd_ioctl.c: Pass pointer to rscsi_disks element instead of index
1321 * scsi.c: Remove redundant Maxtor XT8760S from blacklist.
1331 * scsi_ioctl.c: Only pass down the actual number of characters
1335 * ultrastor.c: Changes from Caleb Epstein for 24f cards. Support
1338 * ultrastor.c: Changes from me - use scsi_register to register
1348 * scsi.c: Make SCSI_RESET_PUNT the same as SCSI_RESET_WAKEUP for
1351 * aha1542.c: If the command responsible for the reset is not
1354 * aha1740.c, buslogic.c, wd7000.c, ultrastor.c: Return
1359 * buslogic.c: Do not print out message about "must be Adaptec"
1367 * sg.c, sg.h: Return sense data to user.
1369 * aha1542.c, aha1740.c, buslogic.c: Do not panic if
1372 * hosts.c: Test for ultrastor card before any of the others.
1374 * scsi.c: Allow boot-time option for max_scsi_luns=? so that
1383 * buslogic.[c,h]: New driver from David Gentzel.
1388 but it is apparently faster if sd.c condenses this into a smaller
1391 * sd.c: Use this field instead of heuristic.
1401 * scsi.c: Act based upon return codes from abort/reset functions.
1405 * Add code in scsi.c to help debug timeouts. Use #define
1408 * scsi.c: If the host->irq field is set, use
1414 * constants.c: Fix some things to eliminate warnings. Add some
1417 * aha1542.c: Watch for SCRD from host adapter - if we see it, set
1421 * aha1542.c (aha1542_abort): Look for lost interrupts, OGMB still
1424 * aha1542.c (aha1542_reset): Try BUS DEVICE RESET, and then pass
1432 * st.c, st.h: New version from Kai. Supports boot time
1435 * wd7000.[c,h]: Updated driver from John Boyd. Now supports
1442 * sd.c: Add a few type casts where scsi_malloc is called.
1448 * scsi.c: Clean up a few printks (use %p to print pointers).
1454 * fdomain.c: Update to version 5.16 (Handle different FIFO sizes
1479 * fdomain.c: Update to version 5.16 (Handle different FIFO sizes
1486 * fdomain.c: Update to version 5.15 from 5.9. Handles 3.4 bios.
1492 * wd7000.c: Make stab at fixing race condition.
1498 * aha152x.c, Makefile: Fix a few bugs (too much data message).
1501 * aha1542.c: Fix race condition in aha1542_out.
1507 * sd.c, st.c, sr.c, sg.c: Return -ENXIO, not -ENODEV if we attempt
1510 * scsi.c: Add Chinon cdrom to blacklist.
1512 * sr_ioctl.c: Check return status of verify_area.
1518 * scsi.c: Add IMS CDD521, Maxtor XT-8760S to blacklist.
1524 * aha1542.c: For 1542C, allow dynamic device scan with >1Gb turned
1527 * constants.c: Fix typo in definition of CONSTANTS.
1535 * scsi.c: Add Maxtor XT-3280 and Rodime RO3000S to blacklist.
1537 * scsi.c: Allow tagged queueing for scsi 3 devices as well.
1551 * scsi.c: Add Teac cdrom to blacklist.
1561 * wd7000.c (wd_bases): Fix typo in last change.
1567 * aha1542.c: Support 1542CF/extended bios. Different from 1542C
1569 * wd7000.c: Allow bios at 0xd8000 as well.
1571 * ultrastor.c: Do not truncate cylinders to 1024.
1573 * fdomain.c: Update to version 5.9 (add new bios signature).
1575 * NCR5380.c: Update from Drew - should work a lot better now.
1581 * sr_ioctl.c: Zero reserved field before trying to set audio volume.
1587 * fdomain.c: Update to version 5.8. No functional difference???
1593 * ultrastor.c: Remove outl, inl functions (now provided elsewhere).
1599 * aha152x.c: Remove insw and outsw functions.
1601 * fdomain.c: Ditto.
1607 * scsi.c: Support RECOVERED_ERROR for tape drives.
1609 * st.c: Update of tape driver from Kai.
1615 * aha1542.[c,h]: Support extended BIOS stuff.
1617 * scsi.c: Clean up messages about disks, so they are displayed as
1620 * sr.c: Force reread of capacity if disk was changed.
1627 * aha152x.c: Update to version .101 from Juergen.
1640 * NCR5380.c, NCR5380.h, g_NCR5380.c, g_NCR5380.h, pas16.c,
1641 pas16.h, t128.c, t128.h: New files from Drew.
1643 * aha152x.c, aha152x.h: New files from Juergen Fischer.
1645 * aha1542.c: Support for more than one 1542 in the machine
1649 * aha1740.c: Set NEEDS_JUMPSTART flag in reset function, so we
1653 * constants.c: Clean up a few things.
1655 * fdomain.c: Update to version 5.6. Move snarf_region. Allow
1660 * hosts.c: Support new low-level adapters. Allow for more than
1665 * scsi.c: Add scsi_device_types array, if NEEDS_JUMPSTART is set
1674 * scsi_ioctl.c: Fix bug in buffer length in ioctl_command. Use
1679 * sd.c: Only pay attention to UNIT_ATTENTION for removable disks.
1685 * seagate.c: Fix so that some parameters can be set from the lilo
1691 * sg.c, sg.h: New files from Lawrence Foard for generic scsi
1694 * sr.c: Add type casts for (void*) so that we can do pointer
1696 correct. Same bugfix as was in sd.c. Increase read-ahead a la
1699 * sr_ioctl.c: Use scsi_malloc buffer instead of buffer from stack
1702 ultrastor.c: Update to support 24f properly (JFC's driver).
1704 wd7000.c: Supply jumpstart flag for reset. Do not round up
1714 * aha1542.c: Do hard reset instead of soft (some ethercard probes
1717 * scsi.c: Add new flag ASKED_FOR_SENSE so that we can tell if we are
1720 * sd.c: Add code to spin up a drive if it is not already spinning.
1723 * sd_ioctl.c: Use sync_dev instead of fsync_dev in BLKFLSBUF ioctl.
1725 * seagate.c: Switch around DATA/CONTROL lines.
1727 * st.c: Change sense to unsigned.
1733 * constants.c, constants.h: New files with ascii descriptions of
1739 * aha1542.c: Replace 16 with sizeof(SCpnt->sense_buffer). Add tests
1742 * aha1740.c: Ditto with sizeof().
1744 * fdomain.c: Update to version 3.18. Add new signature, register IRQ
1746 obtaining the h/s/c numbers for biosparam.
1748 * hosts.c: Do not depend upon Makefile generated count of the number
1751 * scsi.c: Use array for scsi_command_size instead of a function. Add
1760 * scsi_debug.c: Change some constants to use symbols like INT_MAX.
1762 * scsi_ioctl.c (kernel_scsi_ioctl): New function -for making ioctl
1765 * sd.c: Increase timeout to 300. Use functions in constants.h to
1769 * sd_ioctl.c: Add BLKFLSBUF ioctl.
1771 * seagate.c: Add new compile time options for ARBITRATE,
1775 * sr.c: Use functions in constants.c to display messages.
1777 * st.c: Support for variable block size.
1779 * ultrastor.c: Do not use cache for tape drives. Set
1790 * Makefile: Compile seagate.c with C++ compiler.
1792 * aha1542.c: Always set ccb pointer as this gets trashed somehow on
1795 * aha1740.c: Add a few type casts.
1797 * fdomain.c: Update to version 3.17 from 3.6. Now works with
1800 * scsi.c: Minor changes here and there with datatypes. Save use_sg
1805 * scsi_ioctl.c: Add a few type casts. Other minor changes.
1807 * sd.c: Correctly free all scsi_malloc'd memory if we run out of
1810 * seagate.c: Minor cleanups here and there.
1812 * sr.c: Set up blocksize array for all discs. Fix bug in freeing
1819 * aha1542.c: Support for BT 445S (VL-bus board with no dma channel).
1821 * fdomain.c: Upgrade to version 3.6. Preliminary support for TNC-18C50.
1823 * scsi.c: First attempt to fix problem with old_use_sg. Change
1827 * sd.c: Add block_fsync function to dispatch table.
1829 * sr.c: Increase timeout to 500 from 250. Add entry for sync in
1836 * st.c: Add NULL for fsync in dispatch table.
1838 * wd7000.c: Allow another condition for power on that are normal
1845 * aha1542.c: Use (void) instead of () in setup_mailboxes.
1847 * scsi.c: Initialize transfersize and underflow fields in SCmd to 0.
1853 * scsi_ioctl.c: Further bugfix to ioctl_probe.
1855 * sd.c: Use long instead of int for last parameter in sd_ioctl.
1858 * sd_ioctl.c: Ditto for sd_ioctl(,,,,);
1860 * seagate.c: New version from Drew. Includes new signatures for FD
1866 * sr.c, sr_ioctl.c: Use long instead of int for last parameter in sr_ioctl.
1870 * ultrastor.c: Comment out in_byte (compiler warning).
1872 * wd7000.c: Change () to (void) in wd7000_enable_dma.
1878 * aha1542.c: Handle mailboxes better for 1542C.
1881 * aha1740.c: Fix a few minor bugs for multiple devices.
1884 * scsi.c: Add lockable semaphore for removable devices that can have
1892 * scsi_ioctl.c: Make ioctl_probe function more idiot-proof. If
1897 * sd.c: Fix race condition for multiple disks. Use INIT_SCSI_REQUEST
1902 * seagate.c: Use volatile keyword for memory-mapped register pointers.
1904 * sr.c: Fix race condition, a la sd.c. Increase the number of retries
1909 * st.c: If ioctl not found in st.c, try scsi_ioctl for others.
1911 * ultrastor.c: Do not truncate number of cylinders at 1024 for
1914 * wd7000.c: Ditto.
1927 * aha1542.c: Handle unexpected interrupts better.
1929 * scsi.c: Ditto. Handle reset conditions a bit better, asking for
1932 * scsi_ioctl.c: Allow for 12 byte scsi commands.
1934 * ultrastor.c: Update to use scatter-gather.
1940 * fdomain.c: Update to version 3.5. Handle spurious interrupts
1943 * sd.c: Use register_blkdev function.
1945 * sr.c: Ditto.
1947 * st.c: Use register_chrdev function.
1949 * wd7000.c: Undo previous change.
1955 * scsi.c: Fix bug in testing for UNIT_ATTENTION.
1957 * wd7000.c: Check at more addresses for bios. Fix bug in biosparam
1964 * scsi.c: Ignore leading spaces when looking for blacklisted devices.
1966 * seagate.c: Add a few new signatures for FD cards. Another patch
1977 * fdomain.c: Update to version 3.3 (a few new signatures).
1979 * scsi.c: Add CDU-541, Denon DRD-25X to blacklist.
1983 * seagate.c: Allow controller to be overridden with CONTROLLER symbol.
1986 * st.c: Changes from Kai.
1992 * scsi.c: Blacklist back in. Remove Newbury drive as other bugfix
1995 * sd.c: Return ENODEV instead of EACCES if no such device available.
1998 * sr.c: Same as above for sd.c.
2000 * st.c: Return ENODEV instead of ENXIO if no device. Init chrdev_fops
2003 * seagate.c (controller_type): New variable to keep track of ST0x or
2007 * wd7000.c (wd7000_set_sync): Remove redundant function.
2013 * scsi_ioctl.c: Bugfix - check dev->index, not dev->id against
2016 * sr_ioctl.c: Verify that device exists before allowing an ioctl.
2018 * st.c: Patches from Kai - change timeout values, improve end of tape