Lines Matching refs:option

304   BusLogic has provided an AutoSCSI configuration option to enable a legacy ISA
307   To enable this backward compatibility option, invoke the AutoSCSI utility via
311   the "ISA Compatible Port" option should be set back to "Disable" to avoid
313   this configuration option, but the factory default setting is "Primary".
336   the "Use Bus And Device # For PCI Scanning Seq." option to OFF.
338   This driver will interrogate the setting of the PCI Scanning Sequence option
360 for multiple host adapters may be specified either by separating the option
362 command line.  Individual option specifications for a single host adapter are
371   The "IO:" option specifies an ISA I/O Address to be probed for a non-PCI
380   The "NoProbe" option disables all probing and therefore no BusLogic Host
385   The "NoProbeISA" option disables probing of the standard BusLogic ISA I/O
398   The "NoSortPCI" option forces PCI MultiMaster Host Adapters to be
400   the AutoSCSI "Use Bus And Device # For PCI Scanning Seq." option.
404   The "MultiMasterFirst" option forces MultiMaster Host Adapters to be probed
413   The "FlashPointFirst" option forces FlashPoint Host Adapters to be probed
421 that explicitly enabling Tagged Queuing may lead to problems; the option to
428   The "QueueDepth:" or QD:" option specifies the Queue Depth to use for all
431   option is provided, the Queue Depth will be determined automatically based
439   lower Queue Depth option is provided.  A Queue Depth of 1 automatically
444   The "QueueDepth:[...]" or "QD:[...]" option specifies the Queue Depth
450   The "TaggedQueuing:Default" or "TQ:Default" option permits Tagged Queuing
456   The "TaggedQueuing:Enable" or "TQ:Enable" option enables Tagged Queuing for
462   The "TaggedQueuing:Disable" or "TQ:Disable" option disables Tagged Queuing
467   The "TaggedQueuing:<Target-Spec>" or "TQ:<Target-Spec>" option controls
480   The "BusSettleTime:" or "BST:" option specifies the Bus Settle Time in
487   The "InhibitTargetInquiry" option inhibits the execution of an Inquire
496   The "TraceProbe" option enables tracing of Host Adapter Probing.
500   The "TraceHardwareReset" option enables tracing of Host Adapter Hardware
505   The "TraceConfiguration" option enables tracing of Host Adapter
510   The "TraceErrors" option enables tracing of SCSI Commands that return an
516   The "Debug" option enables all debugging options.