Lines Matching refs:Adapter
61 the BT-948 PCI Ultra SCSI Host Adapter, and then again for the BT-958 PCI Wide
62 Ultra SCSI Host Adapter in January 1996. This was mutually beneficial since
203 Host Adapter not in the following table contact the author beforehand to verify
308 Ctrl-B at system startup and select "Adapter Configuration", "View/Modify
334 the AutoSCSI utility via Ctrl-B at system startup and select "Adapter
372 MultiMaster Host Adapter. If neither "IO:" nor "NoProbeISA" options are
408 by the first PCI MultiMaster Host Adapter, in which case MultiMaster Host
420 presented for execution (either to the Host Adapter or Target Device). Note
432 on the Host Adapter's Total Queue Depth and the number, type, speed, and
451 based on the firmware version of the BusLogic Host Adapter and based on
457 all Target Devices on this Host Adapter, overriding any limitation that
458 would otherwise be imposed based on the Host Adapter firmware version.
463 for all Target Devices on this Host Adapter.
482 Adapter Hard Reset which initiates a SCSI Bus Reset and issuing any SCSI
496 The "TraceProbe" option enables tracing of Host Adapter Probing.
500 The "TraceHardwareReset" option enables tracing of Host Adapter Hardware
505 The "TraceConfiguration" option enables tracing of Host Adapter