Lines Matching refs:parameters

38      2. Setup of hardware, MODEM and KISS parameters with sccinit
66 To setup all parameters you must run /sbin/sccinit from one
69 and sets the hardware, MODEM and KISS parameters. A sample file is
74 1.2.1 configuration of hardware parameters
77 The hardware setup section defines the following parameters for each
220 If you only know the parameters for the PE1CHL driver for DOS,
222 Its parameters are exactly the same as the ones you use with
282 sections IS important. The MODEM parameters are set with the first
286 (or insmod). You can change all parameters but "mode" and "clock" 
311 ax25-utils and the AX.25-HOWTO to learn how to set the parameters of
348 3. Adjustment and Display of parameters
414 The setting of parameters of the emulated KISS TNC is done in the 
415 same way in the SCC driver. You can change parameters by using
421 You can change the following parameters:
442 The parameters have the following meaning: