Lines Matching refs:A

12 A new version of the documentation, along with links to other important
69 and sets the hardware, MODEM and KISS parameters. A sample file is
81 data_a  0x300                   # data port A
82 ctrl_a  0x304                   # control port A
95 	  program. A parameter has no effect.
97 data_a  - the address of the data port A of this Z8530 (needed)
98 ctrl_a  - the address of the control port A (needed)
142 data_a  0x300                   # data port A
143 ctrl_a  0x304                   # control port A
185 A DRSI would should probably work with this:
457      A normal value of this parameter is 30-36.
482      on the baudrate selected.  A few character times should be 
536      time, the transmitter will be keyed down.  A value of 0 is
575      0xx  A byte that can be used to define different groups.  
603 different timing. Try Zilog...  A solution is to write to register 8 
607 A very common problem is that the PTT locks until the maxkeyup timer