Lines Matching refs:Speed
12 - Speed and Duplex Configuration
36 NOTES: For more information about the AutoNeg, Duplex, and Speed
37 parameters, see the "Speed and Duplex Configuration" section in
52 advertised by the adapter. When this parameter is used, the Speed and
55 NOTE: Refer to the Speed and Duplex section of this readme for more
220 Speed
226 Speed forces the line speed to the specified value in megabits per second
229 speed. Duplex should also be set when Speed is set to either 10 or 100.
339 Speed and Duplex Configuration
343 These keywords are Speed, Duplex, and AutoNeg.
354 If Speed = 1000, limited auto-negotiation is enabled and only 1000 Mbps
357 If Speed = 10 or 100, then both Speed and Duplex should be set. Auto-
372 Speed (Mbps) N/A N/A 1000 N/A 100 100 10 10
387 Note that when this parameter is used, Speed and Duplex must not be specified.
390 parameter should not be used. Instead, use the Speed and Duplex parameters