Lines Matching refs:PHY

90 device, whether or not an external PHY is attached to the device and
109 	The chip is connected to an external PHY.
118 	Switch to using the simpler PHY polling method which does not
119 	try and read the MII PHY state regularly. This is only available
120 	when using the internal PHY. See the section on link state polling
124 	"Force simple NSR based PHY polling" allows this flag to be
128 PHY Link state polling
133 depending on the version of the chip and on which PHY is being used.
135 For the internal PHY, the original (and currently default) method is
140 To reduce the overhead for the internal PHY, there is now the option
146 When using an external PHY, the driver currently has to poll the MII
156    1) Interrupt on internal PHY state change. This means that the periodic
157       polling of the PHY status may be disabled on these devices when using
158       the internal PHY.
167 state information, the PHY state and the EEPROM.