Lines Matching refs:run

80 or loaded at run-time as a device driver module.
176 another adapter exists. To change the adapter's configuration, run the 
185 run the CS8900/20 Setup Utility to disable PnP and configure the
387          NOTE: The Setup Utility's diagnostics are designed to run in a
388          DOS-only operating system environment.  DO NOT run the diagnostics 
392 To run the diagnostics tests on the CS8900/20 adapter:
453 on the same network. (Note: the diagnostic network test should not be run 
513     4.) If you have configured the adapter to run in memory mode but the driver
517 If an IO conflict occurs, run the CS8900/20 Setup Utility and perform a 
524 the adapter and reconfigure it by installing it in another PC to run the 
525 CS8900/20 Setup Utility.  Once reinstalled in the target system, run the