Lines Matching refs:network
110 * Appropriate cable (and connector for AUI, 10BASE-2) for your network
312 l) If during DMA operation you find erratic behavior or network data
380 adapter and its network connection. Use the diagnostics 'Self Test' option to
401 * Select 'Network Test' to test the network connection and cabling.
433 adapter's cable is connected to the network (check for LED activity for
451 The Diagnostic Network Test verifies a working network connection by
453 on the same network. (Note: the diagnostic network test should not be run
469 1.) Select a PC with a CS8900/20-based adapter and a known working network
497 receives data. (The yellow LED will appear to "flicker" on a typical network.)
511 3.) You cannot connect to the network or the driver will not load.
592 * Your network operating system and version