Lines Matching refs:IO

107      * 16 bytes of contiguous IO space available between 210h - 370h
216 This example loads the module and configures the adapter to use an IO port base
220 * io=###               - specify IO address (200h-360h)
254    For example, to scan for an adapter located at IO base 0x300,
255    specify an IO address of 0x301.  
410    * IO Register Read/Write Test
411      The IO Register Read/Write test insures that the CS8900/20 can be 
412      accessed in IO mode, and that the IO base address is correct.
502 An IO conflict occurs when two or more adapter use the same ISA resource (IO 
503 address, memory address or IRQ).  You can usually detect an IO conflict in one 
514         reports it is using IO mode when loading, this is an indication of a
517 If an IO conflict occurs, run the CS8900/20 Setup Utility and perform a 
520 resource in conflict.  Run the diagnostics again to check for further IO 
576     * IO Base, Memory Base, IO or memory mode enabled, IRQ, DMA channel