Lines Matching refs:application

89 often the need for adaption of large parts of the application to the
108 same received matching CAN frames.  An application wishing to
111 write application data byte streams, without having to deal with
120   application would have to do all these operations using ioctl(2)s.
128   provides the character device for the application to work with.
135   application on the one hand, and a interface for hardware-specific
174   application opens a CAN RAW socket, the raw protocol module itself
197   To ensure that application A receives the same information in the
230   Frames that can optionally be passed to the user application in the
234   be requested by the user application using the common CAN filter
512   application in the same way as other CAN frames. The possible
527   (e.g. when only one application uses the CAN bus) this loopback
556   Once CAN_RAW_FD_FRAMES is enabled the application can send both CAN frames
557   and CAN FD frames. OTOH the application has to handle CAN and CAN FD frames
595   To build a CAN FD aware application use struct canfd_frame as basic CAN
596   data structure for CAN_RAW based applications. When the application is
808     is useful to reduce messages for the application when the signal inside the
882   In this example an application requests any CAN traffic from vcan0.
1145   Alternatively, the application may realize the "bus-off" condition