Lines Matching refs:multiple
22 multiple network interfaces into a single logical "bonded" interface.
330 Validation is useful in network configurations in which multiple
334 generated by the multiple bonding instances will fool the standard
384 value should be a multiple of the miimon value; if not, it
385 will be rounded down to the nearest multiple. The default
445 when multiple ports are programmed with the same MAC
772 should be a multiple of the miimon value; if not, it will be
773 rounded down to the nearest multiple. The default value is 0.
848 traffic to a particular network peer to span multiple
850 multiple slaves.
997 Before editing, the file will contain multiple lines, and will look
1019 network configuration system will correctly start multiple instances
1062 system if you have multiple bonding devices.
1114 handling multiple bonding devices. All that is necessary is for each
1118 multiple bonding devices with identical parameters, create multiple
1199 is the proper syntax to specify multiple targets. When specifying
1235 Enterprise Linux 5 support multiple bonding interfaces by simply
1239 not support this method for specifying multiple bonding interfaces; for
1304 This section contains information on configuring multiple
1306 initialization scripts lack support for configuring multiple bonds.
1308 If you require multiple bonding devices, but all with the same
1312 To create multiple bonding devices with differing options, it is
1317 provide multiple instances of bonding with differing options is to load
1318 the bonding driver multiple times. Note that current versions of the
1324 To load multiple instances of the module, it is necessary to
1326 requires that every loaded module, even multiple instances of the same
1327 module, have a unique name). This is accomplished by supplying multiple
1357 to configure multiple bonds with differing parameters (as they are older
1369 Use of the sysfs interface allows you to use multiple bonds
1371 It also allows you to use multiple, differently configured bonds when
1592 Any interface that needs a queue_id set should set it with multiple calls
1594 distributions that allow configuration via initscripts, multiple 'queue_id'
2052 connected via multiple physical links, then there is no availability
2065 With multiple switches, the configuration of bonding and the
2066 network changes dramatically. In multiple switch topologies, there is
2085 switches (ISL, or inter switch link), and multiple ports connecting to
2122 In general, however, in a multiple switch topology, the ARP
2126 the ARP monitor should be configured with multiple targets (at least
2178 multiple physical links is, for purposes of configuring bonding, the
2223 TCP/IP connection to stripe traffic across multiple
2317 "local" network configuration, this mode balances multiple
2376 performance, for example), using multiple smaller switches can be more
2478 the interfaces attached to the bond may occupy multiple ports on a
2480 ports, the bond device receives multiple copies of the same packet
2548 multiple switch topology (one or more ESMs, zero or more PMs). It is