Lines Matching refs:RAM

569    |     RAM Addr |                                              ___|
595 	7-8:	RAM Offset Select
637 Setting the Base Memory (RAM) buffer Address
640 The memory buffer requires 2K of a 16K block of RAM. The base of this
646    Switch     | Hex RAM | Hex ROM
991 are swapped (S1 is the nodeaddress, S2 sets IO- and RAM-address).
1070 DIP Switches 1-5 of SW2 encode the RAM and ROM Address Range:
1072 Switches        RAM           ROM
1394 Setting the Base Memory (RAM) buffer Address
1397 The memory buffer (RAM) requires 2K. The base of this buffer can be 
1402    Switch              | Hex RAM | Hex ROM
1606 Setting the Base Memory (RAM) buffer Address
1610 Base address of the RAM (2K) and the PROM.
1612    Switch          | Hex RAM | Hex ROM
1773   | |     |           | RAM |  | UFS | |   
1803 RAM         2k of SRAM
1855 Setting the Base Memory (RAM) buffer Address
1858 The memory buffer (RAM) requires 2K. The base of this buffer can be
1860 A0000 are likely to cause system hang because there's main RAM.
1864    Switch          | Hex RAM
1917          | > RAM (2k)    |         |______||            |    | W |    
1993 Setting the Base Memory (RAM) buffer Address
1996 The memory buffer (RAM) requires 2K. The base of this buffer can be 
2001    Switch              | Hex RAM | Hex ROM
2015 The switches 1 and 2 probably add 0x0800 and 0x1000 to RAM base address.
2066 |    > RAM (2k)    |  |                    |                    | BNC |___|
2133 Setting the Base Memory (RAM) buffer Address
2136 The memory buffer (RAM) requires 2K. The base of this buffer can be
2141    Switch              | Hex RAM | Hex ROM
2155 The jumpers 1 and 2 probably add 0x0800 and 0x1000 to RAM address.
2425     7-8:    RAM Offset Select
2495 Setting the Base Memory (RAM) buffer Address
2498 The memory buffer requires 2K of a 16K block of RAM. The base of this
2504    Switch     | Hex RAM | Hex ROM
2684 Setting the Base Memory (RAM) buffer Address
2687 The memory buffer requires 2K of a 16K block of RAM. The base of this
2693    Switch     | Hex RAM | Hex ROM
2766          | > RAM (2k)    |        ____________________ |  H  |    | S | ID5
2865 Setting the Base Memory (RAM) buffer Address
2868 The memory buffer (RAM) requires 2K. The base of this buffer can be 
2873    Switch              | Hex RAM | Hex ROM
2887 The jumpers 1 and 2 probably add 0x0800, 0x1000 and 0x1800 to RAM adders.
2926    |  >  6116 RAM |         _________                         8 |   |  |
2998 Setting the Base Memory Address (RAM & ROM)
3001 The memory buffer requires 2K of a 16K block of RAM. The base of this
3007    Switch| Hex RAM | Hex ROM