Lines Matching refs:O
256 - the I/O address: this is the "port" your ARCnet card is on. Probed
404 No Name Taiwan R.O.C? 8
458 (I/O and Memory | 1 1 * 0 0 0 0 * 1 1 0 1 |
470 a: The first digit of the I/O address.
478 b: The second digit of the I/O address.
488 The I/O address is in the form ab0. For example, if
568 | Offs|Base |I/O Addr |
593 S1 1-3: I/O Base Address Select
617 Setting the I/O Base Address
621 of eight possible I/O Base addresses using the following table
624 Switch | Hex I/O
724 | node ID is zero | I/O address
777 < IRQ |I/O Addr |
801 SW1 1-6: I/O Base Address Select
858 Setting the I/O Base Address
862 of 32 possible I/O Base addresses using the following table
864 Switch | Hex I/O
951 | node ID is zero | I/O address
974 | | O | |__| ####__'|
1033 SW2: DIP-Switches for Memory Base and I/O Base addresses
1056 The I/O base address is coded with DIP-Switches 6,7 and 8 of SW2:
1189 control the base I/O address of the card.
1191 This was difficult to test by trial and error, and the I/O addresses
1204 210 I/O address
1317 6-8: Base I/O Address Select
1374 Setting the I/O Base Address
1378 of eight possible I/O Base addresses using the following table
1381 Switch | Hex I/O
1532 SW1 1-6: Base I/O Address Select
1584 Setting the I/O Base Address
1587 The first six switches in switch block SW1 are used to select the I/O Base
1590 Switch | Hex I/O
1691 SW 1 : Shared Memory Address and I/O Base
1713 678| I/O Address
1796 SW1 1-6 Base I/O Address Select
1834 Setting the I/O Base Address
1838 of 32 possible I/O Base addresses using the following tables
1850 The I/O address is sum of all switches set to "1". Remember that
1851 the I/O address space bellow 0x200 is RESERVED for mainboard, so
1940 6-8: Base I/O Address Select
1973 Setting the I/O Base Address
1977 of eight possible I/O Base addresses using the following table
1980 Switch | Hex I/O
2055 | |SW1 MEM+I/O| |_________________________| LED1|__|)
2080 6-8 Base I/O Address Select
2113 Setting the I/O Base Address
2117 of eight possible I/O Base addresses using the following table:
2120 Switch | Hex I/O
2193 | Base I/O Base Addr. Station | |
2219 I/O
2416 | \ IRQ / T T O |
2423 S2 1-3: I/O Base Address Select
2476 Setting the I/O Base Address
2480 of eight possible I/O Base addresses using the following table
2482 Switch | Hex I/O
2665 Setting the I/O Base Address
2669 of eight possible I/O Base addresses using the following table
2671 Switch | Hex I/O
2752 8-bit cards ("Made in Taiwan R.O.C.")
2758 "MADE IN TAIWAN R.O.C" printed on the card.
2789 6-8: Base I/O Address Select
2845 Setting the I/O Base Address
2849 of eight possible I/O Base addresses using the following table
2852 Switch | Hex I/O
2932 | | | : O |- 2 | | |
2937 | 1 2 3 4 5 6 7 8 | | : O |- | |
2957 3-6: I/O Address Map
2978 Setting the I/O Base Address
2982 of eight possible I/O Base addresses using the following table
2985 Switch | Hex I/O
3077 ! ROM 7654321 <- I/O -------
3091 Top Jumper line Bit 7 = ROM Enable 654=Memory location 321=I/O
3104 Settings for I/O Address (Top Jumper Line)