Lines Matching refs:it

29 It's cheap, it's available everywhere, and it's easy.
31 The PLIP cable is all that's needed to connect two Linux boxes, and it
55 it *is* getting late. EOB)
67 When a parallel port used for a PLIP driver has an IRQ configured to it, the
68 PLIP driver is signaled whenever data is sent to it via the cable, such that
71 However, on some machines it is hard, if not impossible, to configure an IRQ
72 to a certain parallel port, mainly because it is used by some other device.
75 and if such data is available, process it. This mode is less efficient than
91 On an i386, for example, 10^6/100 = 10000usec. It is easy to see that it is
93 the timeout is only 500usec long. As a result, it is required to change the
151 If the cable you are using has a metallic shield it should be
162 isn't configured for PLIP, as it will result in output driver
184 Once again, if the cable you are using has a metallic shield it should