Lines Matching refs:write

44 write behavior of nodes:
46 link 		:write UP to enable ltsmm DOWN to disable
47 int_type	:write interrupt type to be configured and (int_type could be
51 inta		:write 1 to assert INTA and 0 to de-assert.
52 send_msi	:write MSI vector to be sent.
53 vendor_id	:write vendor id(hex) to be programmed.
54 device_id	:write device id(hex) to be programmed.
55 bar0_size	:write size of bar0 in hex. default bar0 size is 1000 (hex)
57 bar0_address	:write	address of bar0 mapped area in hex. (default mapping of
61 bar0_rw_offset	:write offset of bar0 for which	bar0_data will write value.
62 bar0_data	:write data to be written at bar0_rw_offset.