Lines Matching refs:up

103         Bit4 => scroll up
144         Bit5 => Valid bit, 0 means that the coordinate is invalid or finger up.
145                 When both fingers are up, the last two reports have zero valid
169         Bit5 => Valid bit, 0 means that the coordinate is invalid or finger up.
170                 When both fingers are up, the last two reports have zero valid
210         Bit4 => scroll up button
234         Bit5 => Valid bit, 0 means that the coordinate is invalid or finger up.
235                 When both fingers are up, the last two reports have zero valid
237         Bit4 => finger up/down information. 1: finger down, 0: finger up.
247         Bit5 => scroll up button
261         Bit5 => Valid bit, 0 means that the coordinate is invalid or finger up.
262                 When both fingers are up, the last two reports have zero valid
264         Bit4 => finger up/down information. 1: finger down, 0: finger up.
274         Bit5 => scroll up button
303         Bit5 => scroll up button
376   When one of the two fingers is up, the device will output four consecutive
377 MFMC#0 report packets with zero X and Y to represent 1st finger is up or
379 the 2nd finger is up.  On the other hand, if both fingers are up, the device
408 	0xc0 => finger up/down information
610 'pages.' Each page is able to include up to 255 registers.
612   The default page after power up is 0x82; therefore, if one has to get
677 	0x86	2 finger straight up
685 	0x2e	3 finger straight up
843 	bit3		0	RW	finger up one packet output