Lines Matching refs:PS

333 	Bit3 => Always 1, as specified by PS/2 protocol.
361 	Bit3 => Always 1, as specified by PS/2 protocol.
427 FSP will send out enable/disable packet when FSP receive PS/2 enable/disable
448 * PS/2 Command Set
451 FSP supports basic PS/2 commanding set and modes, refer to following URL for
452 details about PS/2 commands:
468 		Refer to 'Finger Sensing Pad PS/2 Mouse Intellimouse'
472 		Refer to 'Finger Sensing Pad PS/2 Mouse Intellimouse'
476 		Refer to 'Finger Sensing Pad PS/2 Mouse Intellimouse'
480 	Refer to 'Finger Sensing Pad PS/2 Mouse Intellimouse'
503 	1. send 0xf3 PS/2 command to FSP;
505 	2. send 0x66 PS/2 command to FSP;
507 	3. send 0x88 PS/2 command to FSP;
509 	4. send 0xf3 PS/2 command to FSP;
515 	5a. send 0x68 PS/2 command to FSP;
523 	6a. send 0xcc PS/2 command to FSP;
527 	7. send 0x66 PS/2 command to FSP;
531 	8. send 0xe9(status request) PS/2 command to FSP;
548 	1. send 0xf3 PS/2 command to FSP;
554 	2a. send 0x74 PS/2 command to FSP;
562 	3a. send 0x77 PS/2 command to FSP;
566 	4. send 0x55 PS/2 command to FSP;
570 	5. send 0xf3 PS/2 command to FSP;
576 	6a. send 0x47 PS/2 command to FSP;
584 	7a. send 0x44 PS/2 command to FSP;
588 	8. send 0x33 PS/2 command to FSP;
596 	result. Host can optionally send another 0xe9 (status request) PS/2
619 	1. send 0xf3 PS/2 command to FSP;
621 	2. send 0x66 PS/2 command to FSP;
623 	3. send 0x88 PS/2 command to FSP;
625 	4. send 0xf3 PS/2 command to FSP;
627 	5. send 0x83 PS/2 command to FSP;
629 	6. send 0x88 PS/2 command to FSP;
631 	7. send 0xe9(status request) PS/2 command to FSP;
637 	1. send 0xf3 PS/2 command to FSP;
639 	2. send 0x38 PS/2 command to FSP;
641 	3. send 0x88 PS/2 command to FSP;
643 	4. send 0xf3 PS/2 command to FSP;
649 	5a. send 0x47 PS/2 command to FSP;
657 	6a. send 0x44 PS/2 command to FSP;
661 	7. send 0x33 PS/2 command to FSP;
811 	bit7		0	RW	EN_PS2_F2: PS/2 gesture mode 2nd
870 					enable. Works only in H/W based PS/2