Lines Matching refs:temperature

38   (automatic fan speed control) on all temperature/PWM combinations, 2
52   - If the value is 6, it starts monitoring using the temperature sensor
60   For temperature sensors, an alarm triggers if the measured value goes
61   above the high temperature limit, and wears off only after the measured
73   Each temperature channel can control all the 8 PWM outputs (by setting the
74   corresponding bit in tempX_fan_map), you can set the temperature channel
78   PWM value requests from different temperature channels, but the chip
81   In Thermal Cruise mode, the chip attempts to keep the temperature at a
85   the PWM value. If the temperature is within the tolerance range, the PWM
88   SmartFanII works differently, you have to define up to 7 PWM, temperature
89   trip points, defining a PWM/temperature curve which the chip will follow.