Lines Matching refs:fan
38 The driver implements three temperature sensors, seven fan rotation speed
39 sensors, nine voltage sensors, and two automatic fan regulation
41 Automatic fan control mode is possible only for fan1-fan3. Fan4-fan7 can run
42 synchronized with selected fan (fan1-fan3). This functionality and manual PWM
89 of full speed rotation of corresponding fan.
120 Works as expected. You just need to specify desired PWM/DC value (fan speed)
127 fan speed to keep the temperatures of CPU and the system within specific
130 interval. The fan speed will be lowered as long as the current temperature
132 exceeds the high limit (T+tolerance), the fan will be turned on with a
140 limit (T-tolerance), the fan speed will be fixed at the current speed because
150 W83792D also provides a special mode for fan. Four temperature points are
154 for each fan.
160 pwm[1-3] - this file stores PWM duty cycle or DC value (fan speed) in range:
162 pwm[1-3]_enable - this file controls mode of fan/temperature control:
172 sf2_point[1-4]_fan[1-3] - four temperature points for each fan for Smart Fan II
173 sf2_level[1-3]_fan[1-3] - three PWM/DC levels for each fan for Smart Fan II