Lines Matching refs:that

26 Note that this parameter has no effect for the PC87360, PC87363 and PC87364
29 Also note that for the PC87366, initialization levels 2 and 3 don't enable
54 The driver assumes that no more than one chip is present, and one of the
88 Note that not all RPM values can be represented, even when the best clock
98 that the fan is stopped, and 255 meaning that the fan goes at full speed.
126 Note that these three additional channels share their pins with the
129 the documents from National Semiconductor suggest that motherboard
164 is read at least once. This means that the cause for the alarm may already
165 have disappeared! Note that all hardware registers are read whenever any
171 Monitoring of in9 isn't enabled at lower init levels (<3) because that
172 channel measures the battery voltage (Vbat). It is a known fact that
174 Semiconductor smartly designed their chipset so that in9 is sampled only
175 once every 1024 sampling cycles (that is every 34 minutes at the default
182 The datasheets suggests that some values (fan mins, fan dividers)
183 shouldn't be changed once the monitoring has started, but we ignore that