Lines Matching refs:pwm
87 pwm[1-5] - this file stores PWM duty cycle or DC value (fan speed) in range:
90 pwm[1-5]_enable - this file controls mode of fan/temperature control:
92 * 1 Manual mode, write to pwm[0-5] any value 0-255
98 pwm[1-5]_mode - controls if output is PWM or DC level
105 pwm[1-5]_temp_sel Temperature source. Value is temperature sensor index.
107 pwm[1-5]_weight_temp_sel
115 pwm[1-5]_weight_duty_step
117 pwm[1-5]_weight_temp_step
120 to the current pwm value.
121 pwm[1-5]_weight_temp_step_base
124 pwm[1-5]_weight_temp_step_tol
132 pwm[1-5]_target_temp Target temperature, unit millidegree Celsius
134 pwm[1-5]_temp_tolerance
142 pwm[1-5]_start fan pwm start value (range 1 - 255), to start fan
144 pwm[1-5]_floor lowest fan pwm (range 0 - 255) if temperature is below
147 pwm[1-5]_step_up_time milliseconds before fan speed is increased
148 pwm[1-5]_step_down_time milliseconds before fan speed is decreased
149 pwm[1-5]_stop_time how many milliseconds must elapse to switch
169 controlled by setting the pwm and temperature attributes. When the temperature
172 points should be set to higher temperatures and higher pwm values to achieve
176 pwm[1-5]_auto_point[1-7]_pwm
177 pwm value to be set if temperature reaches matching
179 pwm[1-5]_auto_point[1-7]_temp
180 Temperature over which the matching pwm is enabled.
181 pwm[1-5]_temp_tolerance
183 pwm[1-5]_crit_temp_tolerance
187 pwm[1-5]_step_up_time milliseconds before fan speed is increased
188 pwm[1-5]_step_down_time milliseconds before fan speed is decreased